CLC 压式应用称重传感器

概述

拉压力传感器又叫电阻应变式传感器，隶属于称重传感器系列，是一种将物理信号转变为可测量的电信号输出的装置。广泛运用在工业称重系统、平台秤、电子秤、吊钩秤、配料秤等测力场合。

美国Transducer Techniques CLC系列压式力传感器是以弹性体为中介，通过力作用在帖传感器两边的电阻应片使它的阻值发生变化，再经过相应的电路转换为电的信号，从而实现后面的控制。它的优点是精度高，测量范围广,寿命长,结构简单，频响特性好。

CAPACITY RANGES:

50,000, 100,000, 200,000, 300,000, 400,000 LBS.

Our CLC Series is our high capacity compression only load cell, featuring low profile compact size for a wide range of portable and dedicated . The diameter (D1) is slightly convex for accurate load distribution. Low deflection through design results in ultra fast frequency . All Transducer CLC ranges are made from 17-4ph heat treated stainless steel and incorporate a stainless steel molded connector system designed to resist washdown and splash. The mating connector, sold seperately, is available in three different cable lengths.

参数

Rated Output (R.O.): 2 mV/V nominal

Nonlinearity: 0.25% of R.O.

Hysteresis: 0.25% of R.O.

Nonrepeatability: 0.1% of R.O.

Zero Balance: 1.0% of R.O.

Compensated Temp. Range: 60° to 160°F

Safe Temp. Range: -65° to 200°F

Temp. Effect on Output: 0.005% of Load/°F

Temp. Effect on Zero: 0.01% of R.O./°F

Terminal Resistance: 350 ohms nominal

Excitation Voltage: 10 VDC

Safe Overload: 150% of R.O.

配件

CAL-TEDS   Plug & Play Option with Connector

AMM-66SS   Mating Assembly 6 ft Cable

AMM-612SS  Mating Assembly 12 ft Cable

AMM-620SS  Mating Assembly 20 ft Cable

AMM-650SS  Mating Assembly 50 ft Cable