厂商 :深圳市汉斯福特科技有限公司
广东 深圳- 主营产品:
3045A低温加速度传感器
概述
The Dytran 3045A is an IEPE accelerometer with continuous operation to -320°F (-196°C), expressly designed to support cryogenic vibration testing requirements.
Offered with a 5 mV/g sensitivity, the design of model 3045A incorporates a two-pole low-pass filter, which aids in eliminating spurious high frequency data, and a rugged stainless steel construction, along with a 1/4-28 integral mounting stud and a 10-32 axial connector. Even at extreme temperatures, the model 3045A displays an extremely stable and continuous signal output. Units are hermetically sealed for reliable operation in high humidity and dirty environments. The accelerometer is also electrically isolated via use of an internal Faraday shield for noise immunity.
特性
1. 5 mV/g sensitivity
2. 1,000g range
3. 4.8 to 1,800 Hz frequency range (±5%)
4. 10-32 axial connector
5. 1/4-28 stud mount
6. 20 grams
7. Stainless steel
8. Hermetic
9. Case isolated
10. -320°F (-196°C) operation
11. Two-pole low pass filter
12. Stable Mosfet amplifier technology
13. IEPE
应用
1. Cryogenic pump vibration measurements
2. Cryogenic industrial monitoring
3. Rocket engine vibration test stands
参数
Weight 0.70 oz 20 grams Notes:
Connector, Coaxial 10-32 10-32
Mounting Provision : Integral Stud 1/4 - 28 UNF-2A 1/4 - 28 UNF-2A
Material : Base, Cap, and Connector 300 Series S.S. 300 Series S.S. amplifier.
Element Material, Style Quartz, Shear Quartz, Shear
Sensitivity, ±5% [1] 5 mV/g 0.51 mV/m/s2
Range F.S for ± 5 Volts Output ±1000 g ± 9810 m/s2
Frequency Range ±3db 1.6 to 2500 Hz 1.6 to 2500 Hz
Filter Rolloff Rate 12 db/octave 12 db/octave
Filter Corner Frequency 2,500 Hz 2,500 Hz
Resonant Frequency >35 kHz >35 kHz
Noise floor 0.007 Grms 0.069 m/s2 rms
Linearity [2] ± 1% % F.S. ± 1% % F.S.
Maximum Transverse sensitivity 5 % 5 %
Strain Sensitivity 0.002 g/μσ 0.02 m/s2
Maximum Vibration ±1000 G's,peak ±9810 m/s2 peak
Maximum Shock ±2000 G's,peak ±19620 m/s2 peak
Temperature Range -320 to+300 °F -195 to +149 °C
Seal Hermetic Hermetic
Coeffiecient of Thermal Sensitivity .03 %/°F 0.05 %/°C
ELECTRICAL
Supply Current Range [3] 2 to 4 mA 2 to 4 mA
Compliance Voltage Range + 28 Volts + 28 Volts
Output Impedence,Typ 100 Ω 100 Ω
Bias Voltage +7.5 to +9.5 VDC +7.5 to +9.5 VDC
Discharge Time Constant 0.1 to 1.0 Sec 0.1 to 1.0 Sec
Output Signal Polarity for Acceleration Towards Top Positive Positive
Electrical Isolation, Ground (Pin B) to case( pin A) 10 GΩ,min 10 GΩ,min
配件
Recommended Accessories: model 4110C current source power unit
订货型号
3045A