碳纤维导线耐张线夹

本产品引进国外先进技术，耗资多年自主研发，产品性能达到国外同等水平，领先国内同类产品。本产品采用非导磁热铝合金、高强度不锈钢等材料为主要材料精制而成。成品性能大幅提高抗变形能力提高30%以上，尺寸稳定性提高30%以上，疲劳寿命提高20%以上。传输电力容量最大增加一倍，能连续高温运行，最高工作温度可达220℃，具有结构新颖、设计科学、不产生电晕和降低无线电干扰、导流性好、握力极高、节能环保、节约成本、方便施工、增加劳动效率，抵抗恶劣的环境因素和抗自然灾害能力强。广泛的适用于各种电压等级输变配电工程。
            

           This product introduction of foreign advanced technology, at a cost of independent research and development for many years, reach the same level of foreign products performance, leading the domestic similar products. This product USES the heat permeability materials such as aluminum alloy, high strength stainless steel as the main materials refined but become. Product performance greatly improve - resistance to deformation ability increased by more than 30%, dimension stability increased by more than 30%, the fatigue life increased by more than 20%. Double maximum power transmission capacity, can run continuous high temperature, the highest working temperature is 220 ℃, has the advantages of novel structure, design science, and does not produce corona and reducing radio interference, good conductivity, high grip strength, energy conservation, environmental protection, cost saving, convenient construction, increase the labor efficiency, resistance to harsh environment factors and a strong ability to resist natural disasters. Widely applicable to all kinds of voltage grade substation and distribution engineering.engineering.

碳纤维导线耐张线夹.NY-JRLX/T.JLRX1/F1B.碳纤维导线接续管