喷漆房废气净化设备

厂商 :常州蓝阳环保有限公司

江苏 常州
  • 主营产品:
  • 工业废气处理设备
  • 活性炭净化吸附塔
  • UV光解废气处理
联系电话 :18151215269
商品详细描述

    喷漆房废气净化设备,喷涂线废气处理(包验收)喷漆房废气净化设备—蓝阳环保专注于挥发性有机物(VOCs)处理设备的研发生产与销售安装,在工业喷漆房,烤漆房,烘干房,油漆车间,喷涂线,涂装线,喷塑线等废气处理应用上技术成熟,成功解决了建材家具厂,汽车、电动车、自行车制造公司,轮船制造厂,汽车4S店,汽车维修店工业产品加工制造厂,工程机械,冶金厂,塑料制品厂等企业的废气治理难题。

  公司经过多年的努力及新老客户的支持,现已发展成为集研发、制造、工程设计、工程总包和运营于一体的综合环保公司。公司主营:活性炭吸附设备、UV光氧催化设备、等离子设备、水喷淋塔,废气净化塔,酸雾净化塔等相关工业废气治理设备及粉尘治理设备。

 喷漆房、烤漆房废气处理净化设备工作原理:
   1、废气经集气罩、管道收集后,利用离心风机引进入洗涤塔处理设备中,再通过离心风机将气体送至烟囱系统,然后对处理之洁净空气进行高空排放。
   2、洗涤塔处理废气条件是在一定的温度和压力下,设备循环喷淋系统中装置高压喷嘴,填充材料采用高效填充材料,使喷液能达到雾化状态。
   3、在气液相开始接触时,组份的溶解即吸收是主要的,随着时间的延长及溶液中吸收质浓度不断增大,吸收速度会不断减慢,而解吸收的速度却不断增加。
   4、接触到某一时刻,吸收速度和解吸速度相等,气液相间的传递达到平衡相平衡。达到相平衡时表示溶解过程停止。因此此时需要更换洁净洗涤液,否则溶液中已被吸收的组份也可能由液相重新逸回气相,形成解吸。
   本公司产品种类繁多,废气处理设备产品,由于参数不同,尺寸不同,型号不同,运货地址,价格均不同,如需采购,请咨询客户经理,提供参数,型号,尺寸,所用地点,使用环境等因素,客户经理给你准确报价!


  一、工艺流程简介:
   
   喷漆废气处理设备从气体收集系统收集后,进入“活性炭吸附设备”,由于固体吸附剂表面上存在着未平衡和未饱和的分子引力或化学键力,因此当吸附剂的表面与气体接触时,就能吸引气体分子,使其浓聚并保持在吸附剂表面,此现象称为吸附。利用吸附剂固体表面的吸附能力,使喷漆废气中的VOC与大表面的多孔性吸附剂相接触,废气中的污染物被吸附在固体表面上,使其与气体混合物分离,经活性炭吸附设备处理的气体进入UV光解设备,去除有机废气及刺激性异味气体后经排气筒高空排放。
   
   二、UV光解净化原理介绍:
   
   喷漆废气处理设备利用高能高臭氧UV紫外线光束分解空气中的氧分子产生游离氧,即活性氧,因游离氧所携正负电子不平衡所以需与氧分子结合,进而产生臭氧。

   喷漆废气处理设备经过活性炭吸附床处理过的废气进入到本净化设备后,净化设备运用高能UV紫外线光束及臭氧对废气进行协同分解氧化反应,使废气降解转化成低分子化合物、水再通过排风管道排出室外。
   
   喷漆废气处理设备利用高能UV光束裂解废气中细菌的分子键,破坏细菌的核酸(DNA),再通过臭氧进行氧化反应,彻底达到脱臭及杀灭细菌的目的。
  网站:http://www.ptfqcl.com

    fter many years of efforts and the support of new and old customers, has developed into a collection of R & D, manufacturing, engineering design, engineering, general contracting and operations in one of the integrated environmental protection company. The company's main products: activated carbon adsorption equipment, UV equipment, light catalytic oxygen plasma equipment, water spray tower, exhaust gas purification tower, mist purification tower and other related industrial waste gas treatment equipment and dust control equipment.    
    Working principle of waste gas treatment and purification equipment in painting room and baking room:
    1. The exhaust gas is collected by a gas collecting hood and a pipeline, and then is sent into the washing tower treatment equipment by a centrifugal fan, and then the air is sent to the chimney system by a centrifugal fan, and then the upper air is discharged at the upper end of the treated clean air.
    2. The exhaust gas treatment condition of the washing tower is that the high pressure nozzle is installed in the equipment circulating spraying system under certain temperature and pressure, and the filling material adopts high efficiency filling material to make the spraying liquid reach atomization state.
    3.in the gas-liquid phase begins to contact when the dissolved component is mainly absorbed, with the increasing of concentration and prolonging the time of absorption solution, the absorption rate will continue to slow down, and the solution absorption speed is increased.

    The wide range of products, waste gas treatment equipment products, due to different parameters, different sizes, different models, shipping address, billing is, prices are different, such as the need to purchase, please contact customer manager, parameter type, size, the location, environment factors, customer manager to give you accurate quotation!
I. brief introduction of process flow:
   The paint waste gas treatment equipment collected from the gas collection system, into the "active carbon adsorption equipment", because the agent on the surface there are no balance and unsaturated molecular attraction or chemical bonding force of solid adsorption, so when the contact surface and the gas adsorbent, can attract gas, the concentration and keep in the adsorbent surface, this phenomenon is known as adsorption. The adsorption capacity of solid surface, the porous spray VOC in exhaust gas and high surface adsorbent contact, emissions of pollutants by adsorption on the solid surface, separating it from gas mixture by gas equipment, activated carbon adsorption treatment into UV photolysis equipment, removal of organic waste and irritation the smell of gas through the exhaust tube after discharge in the sky.
Two 、 UV principle of photolysis purification:
Lacquering treatment equipment with high energy high ozone ultraviolet light irradiation of UV gas, special cracking gas, such as benzene, toluene, xylene, ammonia and trimethylamine, hydrogen sulfide, dimethyl sulfide hydrogen, methyl mercaptan and dimethyl sulfide, two methyl two sulfur, carbon disulfide and styrene, H2S, sulfide, VOC, n-butanol molecular bond, make a pollutant molecules and ozone oxidation free combined into small molecule compounds harmless or less harmful, such as CO2, H2O etc..

相关产品推荐