QKSC-6-1089-1.17

厂商 :浙江鹏变电气有限公司

浙江 温州
  • 主营产品:
  • 干式变压器
  • 油浸变压器
  • 高压电抗器
联系电话 :18969723308
商品详细描述

 本公司拥有先进的设计开发团队,专注变压器生产开发设计20年,拥有多项专利,特别擅长于非标变压器、电抗器的设计开发生产,欢迎来函来电咨询!

浙江鹏变电气有限公司专业生产树脂绝缘干式变压器,油浸式变压器,特种变压器,非晶合金变压器,非包封线圈干式变压器,三角形立体卷铁心变压器,移相整流变压器,单、三相接地变压器,双分裂整流变压器,单相柱上式油浸变压器,矿用变压器,磁控电抗器,干式铁心串联电抗器,干式铁心并联电抗,干式铁心启动电抗器 ,干式空心电抗器,低压电抗器,变压器叠铁心,变压器卷铁心,光伏变电站,风能变电站,欧式箱式变电站,美式箱式变电站,高低压成套电气设备,高低压开关柜等输变电设备。

 

性能参数

 型号含义 Types of meaning

 

使用条件 Conditions of use
1. 海拔高度不超过 1000 米;
2. 运行环境温度为 -25 ~ +45(℃ );
3. 安装于户内无剧烈震动,无任何有害气体或粉粉尘的场合,无易燃易爆物品;
4. 当起动时间满 2 分钟,应冷却 6 小时才可再次起动。
1. The height is not more than 1000 meters above sea level;
2. Run the environment temperature is 25 ~ + 45 (℃ );
3. installed in indoor no violent vibration, powder without any harmful gases or dust, no inflammable and explosive articles;
4. When the starting time for 2 minutes, full cooling should be 6 hours to startagain.

产品结构 Product structure

QKSC 型干式铁心起动电抗器的铁心采用优质进口冷轧硅钢片,心柱由多个气隙分成均匀小段,气隙采用环氧板作为隔绝,并采用高温高
强粘接剂,以保证气隙在电抗器运行时不发生变化;
铁心端面采用优质硅钢片端面胶,使硅钢片牢固地结合在一起,大大减小了运行中的噪音,并具有较好的防腐蚀性;
线圈绕包式结构,线圈主绝缘采用玻璃纤维浸渍环氧树脂,热烘固化后在真空下浸以耐高温绝缘漆,该线圈不但绝缘性能好,而且机械强度高,
能耐受电机启动时的大电流冲击和冷热冲击而不开裂。

QKSC-type dry-type iron core reactor core using high-quality imports of cold-rolled silicon steel sheet, the core column by a number of air gap is
divided into uniform small segment, the use of epoxy sheet as an isolated gap, and the use of high-temperature high-strength adhesive to ensure
that the air gap In the reactor is running does not change;
The end face of the core is made of high-quality silicon steel sheet, which makes the silicon steel plate firmly combined together, which greatly
reduces the noise in operation and has better corrosion resistance.
Coil winding structure, the main insulation coil using glass fiber impregnated epoxy resin, heat baking after immersion in a vacuum under high
temperature insulating paint, the coil is not only good insulation properties, and high mechanical strength, can withstand the start of the motor
High-current impact and thermal shock without cracking.




订货基本数据 Order is the basic data
QKSC 型干式铁心起动电抗器的铁心采用优质进口冷轧硅钢片,心柱由多个气隙分成均匀小段,气隙采用环氧板作为隔绝,并采用高温高
强粘接剂,以保证气隙在电抗器运行时不发生变化;
铁心端面采用优质硅钢片端面胶,使硅钢片牢固地结合在一起,大大减小了运行中的噪音,并具有较好的防腐蚀性;
线圈绕包式结构,线圈主绝缘采用玻璃纤维浸渍环氧树脂,热烘固化后在真空下浸以耐高温绝缘漆,该线圈不但绝缘性能好,而且机械强度高,
能耐受电机启动时的大电流冲击和冷热冲击而不开裂。
请在订货时以书面形式提出以下参数和技术要求:
1、电抗器的额定容量;
2、系统额定电压和频率;
3、电容器端电压
4、额定电抗率或电抗;
5、额定电流及最大连续电流;
6、动、热稳定电流及持续时间;
7、每次启动运行时间,连续启动运行次数
8、启动冷却周期;
9、使用条件 ( 户内 )
10、其它特殊要求
QKSC-type dry-type iron core reactor core using high-quality imports of cold-rolled silicon steel sheet, the core column by a number of air gap is
divided into uniform small segment, the use of epoxy sheet as an isolated gap, and the use of high-temperature high-strength adhesive to ensure
that the air gap In the reactor is running does not change;
The end face of the core is made of high-quality silicon steel sheet, which makes the silicon steel plate firmly combined together, which greatly
reduces the noise in operation and has better corrosion resistance.
Coil winding structure, the main insulation coil using glass fiber impregnated epoxy resin, heat baking after immersion in a vacuum under high
temperature insulating paint, the coil is not only good insulation properties, and high mechanical strength, can withstand the start of the motor
High-current impact and thermal shock without cracking.

















undefined

undefined


undefined

 

产品价格标价为随机标价,具体报价按顾客提供的实际参数进行报价。 

联 系 人:张立明 先生

电     话:0577—62559928
传     真:0577—62559828

移动电话:13757782378

地     址:中国 浙江 乐清市 潘家垟工业区

邮     编:325600

 

 

相关产品推荐