AB060行星减速机

厂商 :东莞市雨田电机有限公司

广东 东莞市
  • 主营产品:
  • 交流电机
  • 直流电机
  • 铝壳电机
联系电话 :13925546519
商品详细描述
AB060行星减速机,海南行星减速机

注意:此产品价格不含运费不含税、不含顺丰快递,详情请来电咨询!

             供应AB060行星减速机,海南行星减速机

1.【 AB060行星减速机,海南行星减速机】参数

产品品牌 雨田电机 产品型号 AB090-10-S2-P2 齿轮类型 斜齿
输入转速 4000rpm 输出转速 400rpm 电机功率 0.75-0.9KW
许用力矩 48-160Nm  级      数 1(一级)  减  速 比  1:10
标准背隙 ≤5arcmin  效      率 ≥97% 使用温度 -10℃~+90℃
重      量 3.7kg 防护等级 IP65 安装方式 任意安装


2.【 AB060行星减速机,海南行星减速机】特点

  • 低噪音:低于65db;
  • 低背隙:单级可达3弧分内,双级可达5弧分内;
  • 高效率:单段减速在95%以上,双极减速在92%以上。
  • 高输入转速:2000-8000rpm;
  • 高扭矩:14Nm-2000Nm;
  • 稳定性高、钢性好:采用高强度合金钢材,整颗齿轮经硬化处理,非只有表面硬化,确保使用寿命长;
  • 减速比高:采用模块化设计,行星齿箱可相互连结,速比可达1/1000以上。

    Product features:
    1, low noise, less than 65 db;
    2, low back lash: Backlash is under 3 arcmin.Backlash for   2-staage speed reduction is within 5 arcmin
    3, high efficiency, single period of slow down over 95%, bipolar deceleration in more than 92%.
    4, high input speed: 2000-8000 RPM;

    5, high torque: 14 nm - 2000 nm;
    6, high stability, good rigidity, high strength alloy steel, the whole planet gear after hardening treatment, not only the surface hardening, ensure long service life;

    7, high reduction ratio, using modular design, planetary gear box can be interconnected, speed ratio can reach more than 1/1000.

3.【 AB060行星减速机,海南行星减速机】运用行业

1、航空航天、军事产业;

2、医疗设备、电子信息技术设备产

3、工业机器人、自动化生产设备、数控机床设备制造产业;

4、汽车制造、新能源设备制造产业;

5、纺织、印刷、冶金、环保工程设备制造;
6、食品机械、农业设备;
7、烟草机械、仓储物流业。

Second, the product use:
1, aerospace, military industry;
2, medical equipment, electronic information technology equipment industry;
3, industrial robots, automated pr

oduction equipment, numerical control machine tool equipment manufacturing industry;
4, automobile manufacturing, new energy equipment manufacturing industry;
5, textile, printing, metallurgy, environmental protection engineering equipment manufacturing;
6, food machinery, agricultural equipment;
7, tobacco machinery, warehousing logistics industry.
4.【 AB060行星减速机,海南行星减速机】安装说明:


  • 确认马达与减速机规格,并将马达及减速机之安装面擦拭干净
  • 2个黑色的防尘盖从机体上取出
  • 取下马达上原先之键(如有必要,请安装平衡键)
  • 确认马达轴心尺寸,若有必要,装上轴衬套
  • 直立式的装入马达,以螺丝的扭力表,建议扭力值为5%,1-4的顺序,用扳手将附垫片之螺丝轻轻锁上
  • 2颗黑色的防尘盖再装上去。


5.【 AB060行星减速机,海南行星减速机】产品展示

【行星其他系列】产品展示

注意:以上产品图片属性价格仅供参考,详情请来电咨询!!!

相关产品推荐