安全栅

厂商 :上海享沃电汽设备有限公司

上海 宝山区
  • 主营产品:
联系电话 :18818192930
商品详细描述

参数表节选:的技术参数 K-LB-1.30G

产品阐述
2-line protection
一般特性
Number of protected signal lines 2
电气特性
额定电流 250 mA
Leakage current < 10 ?A at 24 V and 25 °C (77 °F) , line-line
额定电压 24 V DC
Maximum continuous operating voltage 30 V DC
Series resistance < 0.5 Ω per line
Impulse rating 10 kV/5 kA (category C2)
2 kV/2 kA (category D1)
Impulse discharge current (10/350 ?s) 2 kA per line (2x)
Nominal discharge current (8/20 ?s) 5 kA per line (10x)
Rated surge current (8/20 ?s) 10 kA per line (1x)
Total discharge current (8/20 ?s) 20 kA (1x)
Voltage protection level max. 100 V line-line for nominal discharge current In 
max. 50 V line-earth for nominal discharge current In
Impulse reset time < 30 ms
Insertion loss ≤ 0.05 dB, at 0 ... 4 kHz, in 600 Ω-System
≤ 3 dB, at 0 ... 174 kHz, in 100 Ω-System
接口
Topology grounded
Conformity
防护等级 IEC 60529:2013
Surge protective devices for low voltage EN 61643-21:2001+A1:2009+A2:2013 
IEC 61643-21:2001+A1:2008+A2:2012
操作条件
安装条件
Mounting location indoor
周围环境
环境温度 -30 ... 80 °C (-22 ... 176 °F) 
For usage in hazardous area observe EC-type examination certificate.
机械特性
防护等级 IP20
连接器 screw terminals , max. core cross-section 2 x 2.5 mm2
重量 approx. 100 g
外形尺寸 12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch)
安装 on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate PTB 00 ATEX 2176 X
标记 Ex-Hexagon II 2(1)G Ex ia IIC T6/T5/T4
内部电容 可忽略的
内部电感 200 ?H
指令符合
Directive 2014/34/EU EN 60079-0:2012+A11:2013 , EN 60079-11:2012
International approvals
CSA 认证
控制图 116-0187 (cCSAus)
IECEx approval IECEx BAS 14.0010X
标签:
相关产品推荐