NAYDJ油浸式高电压试验变压器

NAYDJ Series Oil type/ Gas type/ Dry type Testing Transformer   NAYDJ油浸式高电压试验变压器成套装置

产品简介

NAYDJ系列油浸式高电压试验变压器成套装置（以下简称试变）又称升压器，它是发电站、供配电系统及科研单位等广大用户的基本试验设备。用于对各种电器产品、电气设备、绝缘材料等进行规定电压下的绝缘强度试验，考核产品的绝缘水平，发现被试品的绝缘缺陷，衡量承受过电压的能力。

产品特性

NAYDJ系列 油浸式试验变压器

1、NAYDJ系列油浸式试验变压器选材优良，质量可靠，年稳定性好。

2、电压余度大，电晕声小，局放小。

3、采用新式绝缘材料，体积小，重量轻。

NAYDJ Series Oil type Testing Transformer

Product introduction

NAYDJ Series Oil immersed/ Inflatable / Dry Type Testing Transformer (Short for test transformers), also known as booster, it’s the power station, power supply and distribution systems, and research institutes, and other users  basic testing equipment. Used for a variety of electrical products, electrical equipment, insulation materials, etc. which under the specified voltage dielectric strength test, the insulation level of assessment products found to be defective insulation test to measure the ability of withstand over-voltage.

Also called name

High voltage withstand testing equipment; High voltage testing transformer; AC DC high voltage test device; AC/DC hipot test set; Cascade type high voltage testing transformer; Oil-immersed testing transformer; Oil type test transformer; Gas type test transformer, SF6 gas-typed test transformer, SF6 gas-insulated testing transformer; Dry type test transformer

The Characteristics of Series Oil type Testing Transformer

1. Oil type test transformer selected reliable quality and good stability materials.

2. The voltage margin is high, corona sound is small, partial discharge is small.

3. Adopting modern insulating materials, small in size, light in weight

NAYDQ系列充气式试验变压器

产品特性

1、NAYDQ系列充气式试验变压器体积小，重量轻(比同等级油浸试验变压器轻40%-65%)。

2、洁净，无油污，勿需维护。

3、不受恶劣气候环境影响，现场搬运勿须静止即可做试验。

4、绝缘强度明显高于油浸试验变压器，电晕极小。

采用SF6气体绝缘技术。油浸试变的换代产品，体积小、重量轻、不受气候环境变化影响，局部放电量极小，单台容量电压可达1000kVA/1000kV；现场运用勿静止、无油污、免维护、寿命长、性能指标始终良品等优点。产品为国家级新产品和国家级专利产品。特别适用于110kV及220kV等级的电力运行设备的局部放电测试。是新一代理想的高压试验装置。产品分金属体和绝缘筒外壳、单台与串级电压两种类型。特别适用于高寒、（高原）高海拨地区和环境使用。

NAYDQ Series Gas type Testing Transformer

Product characteristics

1,The gas type testing transformer is in small size and light weight ( it is lighter 40% to 65% than the same level of oil-immersed testing transformer)

2,Clean, greaseless, do not need maintenance after use

3,Weather-proof , on site testing without standstill

4,The dielectric strength is higher than the oil type testing transformer, and the corona is minimal

Introduction of test transformer 

As the only one of applying the SF6 gas-isolated technology, it replaces the oil-immersed transformer by the small volume, light weight, stabilization, and little-current of partial discharge. The voltage capacity of single transformer can even reach 1000kVA/1000kV. It’s also environment-friendly, free of maintenance, long using term, and excellent performances.

As the national new product and patented product, it’s particularly applicable in partial discharge test of 110kV and 220kV electrical devices. And it’s the nanao electric company new generation of ideal high-voltage testing devices with two kinds of products, the metal & dielectric shell and the singe –stage & cascade voltage. It can also be used in the environment of cold and high latitude districts, like altiplanocie