厂商 ：上海芈峥工业控制设备有限公司
上海 金山区- 主营产品：
Overview
PM340 Power Modules in blocksize format, frame sizes FSA to FSF
The PM340 Power Modules in blocksize format feature the following connections and interfaces as standard:
- Line supply connection
- PM?IF interface for connection of the PM340 and CU305 Control Unit. The PM340 Power Module also supplies power to the CU305 Control Unit by means of an integrated power supply.
- Terminals DCP/R1 and R2 for connection of an external braking resistor
- Motor connection made with screw terminals or screw studs
- Control circuit for the Safe Brake Relay for controlling a holding brake
- 2 PE/protective conductor connections
PM340 Power Modules without integrated line filter can be connected to grounded TN/TT and non-grounded IT systems.
PM340 Power Modules with integrated line filter are suitable only for connection to TN systems with grounded star point.
The integrated braking unit (braking chopper) is rated with the capability to continuously utilize the external braking resistor. The temperature of the external braking resistor must be monitored to provide protection against thermal overloading.
Integration
PM340 Power Modules communicate with the CU305 Control Unit via the PM-IF interface.
PM340 Power Module with CU305 DP Control Unit and BOP20 Basic Operator Panel
Note:
Operation of SINAMICS S110 in conjunction with PM240?2 Power Modules is possible with firmware version V4.4 SP3 and higher.
Connection example: PM340 Power Module
Many system components are designed as base components for PM340 Power Modules. I.e. the component is mounted on the baseplate and the PM340 Power Module in front of them in a space-saving construction. Up to two base components can be mounted in front of one another.
|
|
FSA |
FSB |
FSC |
FSD |
FSE |
FSF |
|---|---|---|---|---|---|---|
|
Line filter |
? |
– |
– |
– |
– |
– |
|
Line reactor |
? |
? |
? |
? |
? |
O |
|
Braking resistor |
? |
? |
O |
O |
O |
O |
|
Motor reactor |
? |
? |
? |
O |
O |
O |
? = Suitable as base type
O = Not suitable as base type
– = Not available (use a PM340 Power Module with integrated line filter)
Basic layout of a PM340 Power Module with line reactor as base component
The line side reactors are equipped with terminals on the line side and with a pre-assembled cable on the PM340 Power Module side. When installed, the mains terminals are at the top on frame sizes FSA to FSC, and at the bottom on frame sizes FSD and FSE.
PM340 Power Module in frame size FSA with line reactor and line filter
If a line filter is installed in addition to the line reactor on frame size FSA, the components must be arranged as shown in the diagram above. In this case, the line supply connection is at the bottom.
PM340 Power Module in frame size FSA with line reactor and motor reactor
PM340 Power Modules of frame size FSB and higher are available with integrated line filters, alleviating the need for an external line filter.
For configurations involving more than two base-type system components, e.g. line reactor + motor reactor + braking resistor, individual components must be mounted to the side of the PM340 Power Module. In this instance, the line and motor reactors must be installed behind the PM340 Power Module and the braking resistor to the side.
Technical Specifications
|
|
Air-cooled PM340 Power Module in blocksize format 6SL3210-1S... |
|---|---|
|
Line connection voltage (up to 2000 m/6562 ft above sea level) |
200 V ... 240 V 1 AC ±10% (in operation -15% < 1 min) or 380 ... 480 V 3 AC ±10% (in operation -15% <1 min) |
|
Line |
|
|
Grounded TN/TT systems and non-grounded IT systems |
|
TN systems with grounded star point |
|
Line frequency |
47 ... 63 Hz |
|
Line power factor at rated power |
|
|
>0.96 |
|
|
|
0.45 ... 0.7 |
|
0.65 ... 0.95 |
|
Overvoltage category acc. to EN 60664-1 |
Class III |
|
Precharging frequency of the DC link, max. |
1× every 30 s |
|
DC link voltage, approx. |
1.35 × line voltage |
|
Output frequency |
|
|
0 ... 330 Hz 1) |
|
Electronics power supply |
24 V DC -15 %/+20 % |
|
Radio interference suppression |
|
|
No radio interference suppression |
|
Category C2 acc. to EN 61800?3 |
|
Type of cooling |
Forced air cooling by means of built-in fan |
|
A ambient or coolant temperature (air) in operation for line-side components, Power Modules |
0 ... 40 °C (32 ... 104 °F) without derating, |
|
Installation altitude |
Up to 1000 m (3281 ft) above sea level without derating, |
|
Conformity |
CE (low-voltage and EMC Directives) |
|
Approvals, according to |
cULus |
|
Safety Integrated |
Safety Integrity Level 2 (SIL 2) according to IEC 61508, Additional information is provided in chapter Highlights, section Safety Integrated. |
1) Note the correlation between max. output frequency, pulse frequency and current derating.
|
Line voltage 200 ... 240 V 1 AC |
Air-cooled PM340 Power Module in blocksize format |
|||
|---|---|---|---|---|
|
|
|
6SL3210-1SB11-0... |
6SL3210-1SB12-3... |
6SL3210-1SB14-0... |
|
Output current |
|
|
|
|
|
A |
0.9 |
2.3 |
3.9 |
|
A |
0.8 |
2 |
3.4 |
|
A |
1.4 |
3.3 |
5.5 |
|
A |
2 |
4.6 |
7.8 |
|
Type rating 1) Based on Irated |
kW (hp) |
0.12 (0.16) |
0.37 (0.5) |
0.75 (1) |
|
Rated pulse frequency |
kHz |
4 |
4 |
4 |
|
Power loss |
kW |
0.06 |
0.075 |
0.11 |
|
Cooling air requirement |
m3/s (ft3/s) |
0.005 (0.2) |
0.005 (0.2) |
0.005 (0.2) |
|
Sound pressure level LpA (1 m) |
dB |
<45 |
<45 |
<45 |
|
24 V DC power supply for the Control Unit |
A |
1 |
1 |
1 |
|
Rated input current2) with/without line reactor |
A |
1.4/2.2 |
4/6 |
6.5/10 |
|
Resistance value of the external braking resistor |
Ω |
≥180 |
≥180 |
≥180 |
|
Cable length to braking resistor, max. |
m (ft) |
15 (49) |
15 (49) |
15 (49) |
|
Line supply connection L, N |
|
Screw terminals |
Screw terminals |
Screw terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
DC link connection, DCP/R1, DCN, R2 |
|
Screw terminals |
Screw terminals |
Screw terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
Motor connection U2, V2, W2 |
|
Screw terminals |
Screw terminals |
Screw terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
PE connection |
|
M4 screw |
M4 screw |
M4 screw |
|
Motor cable length3), max. (without external options) |
|
|
|
|
|
m (ft) |
50 (164) |
50 (164) |
50 (164) |
|
m (ft) |
75 (246) |
75 (246) |
75 (246) |
|
Degree of protection |
|
IP20 |
IP20 |
IP20 |
|
Dimensions |
|
|
|
|
|
mm (in) |
73 (2.87) |
73 (2.87) |
73 (2.87) |
|
mm (in) |
173 (6.81) |
173 (6.81) |
173 (6.81) |
|
|
|
|
|
|
mm (in) |
145 (5.71) |
145 (5.71) |
145 (5.71) |
|
mm (in) |
216 (8.50) |
216 (8.50) |
216 (8.50) |
|
mm (in) |
200 (7.87) |
200 (7.87) |
200 (7.87) |
|
Frame size |
|
FSA |
FSA |
FSA |
|
Weight, approx. |
kg (lb) |
1.2 (2.65) |
1.3 (2.87) |
1.3 (2.87) |
1) Rated power of a typical standard asynchronous (induction) motor at 230 V 3 AC.
2) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uk = 1 %.
3) Max. motor cable length 15 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
|
Line voltage 380 ... 480 V 3 AC |
Air-cooled PM340 Power Module in blocksize format |
|||||
|---|---|---|---|---|---|---|
|
|
|
6SL3210-1SE11-3UA0 |
6SL3210-1SE11-7UA0 |
6SL3210-1SE12-2UA0 |
6SL3210-1SE13-1UA0 |
6SL3210-1SE14-1UA0 |
|
Output current |
|
|
|
|
|
|
|
A |
1.3 |
1.7 |
2.2 |
3.1 |
4.1 |
|
A |
1.1 |
1.5 |
1.9 |
2.7 |
3.6 |
|
A |
1.3 |
2 |
2.5 |
3.5 |
4.5 |
|
A |
2.6 |
3.4 |
4.4 |
6.2 |
8.2 |
|
Type rating 1) |
|
|
|
|
|
|
|
kW (hp) |
0.37 (0.5) |
0.55 (0.75) |
0.75 (1) |
1.1 (1.5) |
1.5 (2) |
|
kW (hp) |
0.37 (0.5) |
0.55 (0.75) |
0.75 (1) |
1.1 (1.5) |
1.5 (2) |
|
Rated pulse frequency |
kHz |
4 |
4 |
4 |
4 |
4 |
|
Power loss |
kW |
0.1 |
0.1 |
0.1 |
0.11 |
0.11 |
|
Cooling air requirement |
m3/s (ft3/s) |
0.005 (0.2) |
0.005 (0.2) |
0.005 (0.2) |
0.005 (0.2) |
0.005 (0.2) |
|
Sound pressure level LpA (1 m) |
dB |
<45 |
<45 |
<45 |
<45 |
<45 |
|
24 V DC power supply for the Control Unit |
A |
1 |
1 |
1 |
1 |
1 |
|
Rated input current2) with/without line reactor |
A |
1.3/1.7 |
1.7/2.2 |
2.2/2.6 |
3.1/3.9 |
4.1/4.8 |
|
Resistance value of the external braking resistor |
Ω |
≥390 |
≥390 |
≥390 |
≥390 |
≥390 |
|
Cable length to braking resistor, max. |
m (ft) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
|
Line supply connection U1/L1, V1/L2, W1/L3 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
DC link connection, DCP/R1, DCN, R2 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
Motor connection U2, V2, W2 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
1 ... 2.5 |
|
PE connection |
|
M4 screw |
M4 screw |
M4 screw |
M4 screw |
M4 screw |
|
Motor cable length3), max. |
|
|
|
|
|
|
|
m (ft) |
50 (164) |
50 (164) |
50 (164) |
50 (164) |
50 (164) |
|
m (ft) |
75 (246) |
75 (246) |
75 (246) |
75 (246) |
75 (246) |
|
Degree of protection |
|
IP20 |
IP20 |
IP20 |
IP20 |
IP20 |
|
Dimensions |
|
|
|
|
|
|
|
mm (in) |
73 (2.87) |
73 (2.87) |
73 (2.87) |
73 (2.87) |
73 (2.87) |
|
mm (in) |
173 (6.81) |
173 (6.81) |
173 (6.81) |
173 (6.81) |
173 (6.81) |
|
|
|
|
|
|
|
|
mm (in) |
145 (5.71) |
145 (5.71) |
145 (5.71) |
145 (5.71) |
145 (5.71) |
|
mm (in) |
216 (8.50) |
216 (8.50) |
216 (8.50) |
216 (8.50) |
216 (8.50) |
|
mm (in) |
200 (7.87) |
200 (7.87) |
200 (7.87) |
200 (7.87) |
200 (7.87) |
|
Frame size |
|
FSA |
FSA |
FSA |
FSA |
FSA |
|
Weight, approx. |
kg (lb) |
1.2 (2.65) |
1.2 (2.65) |
1.2 (2.65) |
1.2 (2.65) |
1.2 (2.65) |
1) Rated power of a typical standard asynchronous (induction) motor at 400 V 3 AC.
2) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uk = 1 %.
3) Max. motor cable length 25 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
|
Line voltage 380 ... 480 V 3 AC |
Air-cooled PM340 Power Module in blocksize format |
||||||
|---|---|---|---|---|---|---|---|
|
|
|
6SL3210-1SE16-0... |
6SL3210-1SE17-7... |
6SL3210-1SE21-0... |
6SL3210-1SE21-8... |
6SL3210-1SE22-5... |
6SL3210-1SE23-2... |
|
Output current |
|
|
|
|
|
|
|
|
A |
5.9 |
7.7 |
10.2 |
18 |
25 |
32 |
|
A |
5.2 |
6.8 |
9.1 |
14 |
21 |
27 |
|
A |
6.4 |
8.3 |
10.8 |
19.6 |
27.8 |
37.1 |
|
A |
11.8 |
15.4 |
20.4 |
26.4 |
38 |
52 |
|
Type rating 1) |
|
|
|
|
|
|
|
|
kW (hp) |
2.2 (3) |
3 (5) |
4 (5) |
7.5 (10) |
11 (15) |
15 (20) |
|
kW (hp) |
2.2 (3) |
3 (5) |
4 (5) |
5.5 (10) |
7.5 (10) |
11 (15) |
|
Rated pulse frequency |
kHz |
4 |
4 |
4 |
4 |
4 |
4 |
|
Power loss |
kW |
0.14 |
0.16 |
0.18 |
0.24 |
0.3 |
0.4 |
|
Cooling air requirement |
m3/s (ft3/s) |
0.009 (0.3) |
0.009 (0.3) |
0.009 (0.3) |
0.038 (1.3) |
0.038 (1.3) |
0.038 (1.3) |
|
Sound pressure level LpA (1 m) |
dB |
<50 |
<50 |
<50 |
<60 |
<60 |
<60 |
|
24 V DC power supply for the Control Unit |
A |
1 |
1 |
1 |
1 |
1 |
1 |
|
Rated input current2) with/without line reactor |
A |
5.6/6.7 |
7.5/8.9 |
9.8/12.4 |
17.1/23.1 |
24.6/32.6 |
33/39 |
|
Resistance value of the external braking resistor |
Ω |
≥160 |
≥160 |
≥160 |
≥56 |
≥56 |
≥56 |
|
Cable length to braking resistor, max. |
m (ft) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
|
Line supply connection U1/L1, V1/L2, W1/L3 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 6 |
1 ... 6 |
1 ... 6 |
2.5 ... 10 |
2.5 ... 10 |
2.5 ... 10 |
|
DC link connection, DCP/R1, DCN, R2 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 6 |
1 ... 6 |
1 ... 6 |
2.5 ... 10 |
2.5 ... 10 |
2.5 ... 10 |
|
Motor connection U2, V2, W2 |
|
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
Screw-type terminals |
|
mm2 |
1 ... 6 |
1 ... 6 |
1 ... 6 |
2.5 ... 10 |
2.5 ... 10 |
2.5 ... 10 |
|
PE connection |
|
M5 screw |
M5 screw |
M5 screw |
M5 screw |
M5 screw |
M5 screw |
|
Motor cable length3), max. |
|
|
|
|
|
|
|
|
m (ft) |
50 (164) |
50 (164) |
50 (164) |
50 (164) |
50 (164) |
50 (164) |
|
m (ft) |
75 (246) |
75 (246) |
75 (246) |
75 (246) |
75 (246) |
75 (246) |
|
Degree of protection |
|
IP20 |
IP20 |
IP20 |
IP20 |
IP20 |
IP20 |
|
Dimensions |
|
|
|
|
|
|
|
|
mm (in) |
153 (6.02) |
153 (6.02) |
153 (6.02) |
188.4 (7.42) |
188.4 (7.42) |
188.4 (7.42) |
|
mm (in) |
270 (10.63) |
270 (10.63) |
270 (10.63) |
333.4 (13.13) |
333.4 (13.13) |
333.4 (13.13) |
|
|
|
|
|
|
|
|
|
mm (in) |
165 (6.50) |
165 (6.50) |
165 (6.50) |
185 (7.28) |
185 (7.28) |
185 (7.28) |
|
mm (in) |
236 (9.29) |
236 (9.29) |
236 (9.29) |
256 (10.08) |
256 (10.08) |
256 (10.08) |
|
mm (in) |
220 (8.66) |
220 (8.66) |
220 (8.66) |
240 (9.45) |
240 (9.45) |
240 (9.45) |
|
Frame size |
|
FSB |
FSB |
FSB |
FSC |
FSC |
FSC |
|
Weight, approx. |
kg (lb) |
4 (8.82) |
4 (8.82) |
4 (8.82) |
6.5 (14.3) |
6.5 (14.3) |
6.5 (14.3) |
1) Rated power of a typical standard asynchronous (induction) motor at 400 V 3 AC.
2) The input current depends on the motor load and line impedance. The input currents apply for rated power loading (based on Irated) for a line impedance corresponding to uk = 1 %.
3) Max. motor cable length 25 m (shielded) for PM340 Power Modules with integrated line filter to maintain the limit values of EN 61800-3 Category C2.
|
Line voltage 380 ... 480 V 3 AC |
Air-cooled PM340 Power Module in blocksize format |
|||||
|---|---|---|---|---|---|---|
|
|
|
6SL3210-1SE23-8... |
6SL3210-1SE24-5... |
6SL3210-1SE26-0... |
6SL3210-1SE27-5... |
6SL3210-1SE31-0... |
|
Output current |
|
|
|
|
|
|
|
A |
38 |
45 |
60 |
75 |
90 |
|
A |
33 |
40 |
48 |
65 |
80 |
|
A |
49 |
58 |
78 |
98 |
117 |
|
A |
64 |
76 |
90 |
124 |
150 |
|
Type rating 1) |
|
|
|
|
|
|
|
kW (hp) |
18.5 (25) |
22 (30) |
30 (40) |
37 (50) |
45 (60) |
|
kW (hp) |
15 (20) |
18.5 (25) |
22 (30) |
30 (40) |
37 (50) |
|
Rated pulse frequency |
kHz |
4 |
4 |
4 |
4 |
4 |
|
Power loss |
kW |
0.38 |
0.51 |
0.69 |
0.99 |
1.21 |
|
Cooling air requirement |
m3/s (ft3/s) |
0.022 (0.8) |
0.022 (0.8) |
0.039 (1.4) |
0.022 (0.8) |
0.039 (1.4) |
|
Sound pressure level LpA (1 m) |
dB |
<60 |
<60 |
<61 |
<60 |
<62 |
|
24 V DC power supply for the Control Unit |
A |
1 |
1 |
1 |
1 |
1 |
|
Rated input current2) with/without line reactor |
A |
40/46 |
47/53 |
63/72 |
78/88 |
94/105 |
|
Resistance value of the external braking resistor |
Ω |
≥27 |
≥27 |
≥27 |
≥15 |
≥15 |
|
Cable length to braking resistor, max. |
m (ft) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
15 (49) |
|
Line supply connection U1/L1, V1/L2, W1/L3 |
|
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
|
mm2 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
|
DC link connection, DCP/R1, DCN, R2 |
|
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
|
mm2 |
10 ... 50 |
10 ... 50 |
10 ... 50 |
10 ... 50 |
10 ... 50 |
|
Motor connection U2, V2, W2 |
|
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
M6 screw stud |
|
mm2 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
10 ... 35 |
|
PE connection |
|
M6 screw |
M6 screw |
M6 screw |
M6 screw |
M6 screw |
|
Motor cable length3), max. |
|
|
|
|
|
|
|
m (ft) |
70 (230) |
70 (230) |
70 (230) |
70 (230) |
70 (230) |
|
m (ft) |
100 (328) |
100 (328) |
100 (328) |
100 (328) |
100 (328) |
|
Degree of protection |
|
IP20 |
IP20 |
IP20 |
IP20 |
IP20 |
|
Dimensions |
|
|
|
|
|
|
|
mm (in) |
275 (10.83) |
275 (10.83) |
275 (10.83) |
275 (10.83) |
275 (10.83) |
|
|
418.3/511 |
418.3/511 |
418.3/511 |
498.3/633 |
498.3/633 |
|
|
|
|
|
|
|
|
mm (in) |
203.5 (8.01) |
203.5 (8.01) |
203.5 (8.01) |
203.5 (8.01) |
203.5 (8.01) |
|
mm (in) |
274.5 (10.81) |
274.5 (10.81) |
274.5 (10.81) |
274.5 (10.81) |
274.5 (10.81) |
|
mm (in) |
258.5 (10.18) |
258.5 (10.18) |
258.5 (10.18) |
258.5 (10.18) |
258.5 (10.18) |
|
Frame size |
|
FSD |
FSD |
FSD |
FSE |
FSE |
|
Weight, approx. PM340 without/with int. filter |
kg (lb) |
15.9/19.3 (35/43) |
15.9/19.3 (35/43) |
15.9/19.3 (35/43) |
19.8/27.1 (44/60) |
19.8/27.1 (44/60) |
