砖机 空心砖机 路面透水砖机设备

 

 

北京中材建科

QTY6-15液压全自动砌块成型机生产线

设备优点：

★采用进口PLC程序控制

★人机界面

★触摸式操作

★液压系统驱动

★变频振动

★无触点接近开关监控

★远程调控

★一机多用

  更换模具可生产多孔砖、空心砌块、标砖、路面砖、路缘石、植草砖、护坡砖，带二次布料装置可生产彩色路面砖；集机、光、电、液、高频振动于一体的高科技产品。

   环保：生产过程中无废水、废渣、废气产生，符合环保要求。

北京中材建科全自动制砖机 空心砖机 路面透水砖机设备    

电话：010-65742915 65742916 65742917 65742918 

     传真：010-65742913 65798737

     销售400热线电话：400-6500-456 

      雷工：13121754035 

 

 

 

设备优势

送板机Pallet feeder

 

1.    送板机采用蜗轮减速机，便于安装，易于维护；运行平稳；不易磨损，使用寿命长。

  Pallet feeder uses worm-gear reducer, which is easy to install and maintain and can run smoothly. It’s difficult to wear so that it has a long service life.

 

2.板仓左右两侧都装配滚筒，安放托板，省时省力，提高效率

  Pallet storage device is equipped with rollers on both sizes, when placing the pallets, which can save both time and labor, and increase working efficiency.

 

 

3，             以慢-快-慢的节奏非匀速送板，平稳送板。

  With the slow-fast-slow pace to feed the pallets, the pallets can be delivered smoothly.

 

4.送板机电机与减速机皮带连接传动，在超载情况下皮带会打滑。具有自我保护功能，防电机损坏。多为机械件，故障少。

 The electric motor of pallet feeder and the speed reduction gear are connected by belt, if pallets are stuck or overloaded, the belt will slip automatically. This self-protective function can avoid any damage to the motor. It uses mechanical elements, which ensures rare malfunction.

 

5.送板机外侧加装挡爪，防止送板过程中，其他托板后退。

There are pawls on the outside of the pallet feeder to prevent the pallet from backtracking in the process of feeding pallets.

 

 

6.送板机上加装可以调节高度的支脚，便于调节送板机高度。

 Pallet feeder is equipped with stabilizers to adjust the height.

 

二、出砖机Brick conveyor

 

1,出砖机采用链条出砖，16A链条承重6吨，坚固耐用，不易打滑，匀速平稳出砖。

  Brick conveyor convey the bricks with a chain, 16A chain can bear load up to 6 tons. It’s durable and can convey the bricks smoothly without slipping occurrence.

 

2,出砖机上装有毛刷，以清理砖上的残料。安装简单，成本低，维修保养成本低。

  Brick conveyor machine is equipped with brush, which cleans the defective materials. It’s easy to install and has low maintain cost.

3,出砖机上加装可以调节高度的支脚，便于调节出砖机高度。

  There are feet on the machine to adjust the height of the brick conveyor.

4,出砖机采用摆线式针轮减速机

Brick conveyor uses cycloid pin-wheel speed reducer.

 

 

 

三、主机Main machine

 

1.机架采用厚壁钢材，通过矩型焊接技术焊接，确保设备坚固耐用，保证质量。

 The frame made by thick steel is welded by rectangular welding method, thus making the machine sturdy and durable, with high quality.

 

2.双杆定位导柱连接主机架与副机架，定位标准，副机架高度易于调节。

 Dual poles positioning guide connect the main machine and the sub-frame, which can position accurately. Otherwise, it’s easy to adjust the height of the sub-frame

 

3.特制料车轨道压轨，料少料车跳动，减少漏料。

Special designed skip car press track, reduce the beat of the skip car and reduce the leakage of the materials.

 

4.采用五轴异步破拱机构，加快下料速度，使布料更均匀。

Using the broken arch method of 5 axis move in different pace to increase the speed of putting material and make the material move evenly.

 

5.拨料轴两端加装耐磨密封圈，防止原材料进入轴承座而损坏轴承。

 Batching material axis is equipped with wear-resistant seal to prevent the raw material form falling into the axis to damage the axis

6.料车上加装高强度耐磨平切口刮料板，有效控制漏料，保证台面干净整洁。

 The skip car is equipped with high intensity wear-resistant flat scrapper board cuts, which can control the leakage of the material and keep the board clean

 

 

7.料车运行平稳，下料速度快，加快原材料活化反应速度，使砖的密实度高。

  Skip car run smoothly and cut material quickly, which can increase the speed of the raw material activation reaction

8料车上加装毛刷，清洁上模残料，保证砖成品清洁美观。

 There are brushes on the skip car to clean the residual material of the upper mold, insuring the cleanness and beauty of the brick

9.轨道滑块易于调节料车高度。

Track slider can easily adjust the height of the skip car.

10.拨料叉维修方便，成本低。

Material fork is easy to maintain and has low cost.

 

四、激振系统the vibration system

 

1.减振弹簧与减振垫结合，保护设备。

the anti-vibration spring and the anti-vibration pad have vibration dumping effect, which can protect the machine while it is working.

 

 

2.加装垂直定向机构，确保振台只在垂直方向振动。

 This machine also adapts vertical orientation mechanism, which makes sure the vibration table only moves in the vertical direction.

3.加装注油孔，便于向振动箱内注入润滑油，同时，注油孔还可以将振动箱内的气体排出，进而保护振动箱。

 The oil filler holes works as air-moving devices to protect the vibration case, to avoid any damage because of high temperature.

 Meanwhile, by adding the lubricating oil into the oil filler holes, the machine can work smoothly in a longer operating life.

 

4.采用电机带动振动箱，启动速度快，激振频率高，激振力强。且易于检修维护。

 The machine employs electrical motor to drive the vibration case. The motor has high starting speed with high vibration frequency and strong vibration force.

 Otherwise, it’s very convenient and easy for maintenance.

5.可调摆臂同步，快速方便，确保模框升降平稳一致。两边结构不一样，一边固定，另一侧调节。

 The adjustable swing arms is synchronous, and one-side arm is fixed, the-other-side one is adjustable

 So that the mold case can move up and down smoothly and steadily.

 

6.大尺度调节副架高度，大螺距可旋梯形螺杆，快速，平稳，准确。

 Coarse pitch screw can adjust the sub-frame to a high attitude stably and accurately at a quick speed.

 

 

 

五、液压系统Hydraulic system

 

1,液压元件采用国际知名品牌，保证质量。

  The main hydraulic elements and seals are imported from China Taiwan,

  adopts the Youshun technology, which ensures the good performance of the machine.

  

2,油管采用三到五层高压油管，油管由专业厂家生产，不会漏油。最高达34MPA

 The oil tubes are made of 3-5 layers high-pressure oil pipe, so the phenomenon of permeating

 and leaking oil rarely occurs.

 This highest intensity of pressure is 34MPA.

  

3,油管高空加设，整洁美观。

  The oil pipes are installed in a high attitude, which makes the machine look clean and beautiful.

4,油箱上加装冷却器，保证油温不会太高。同时，油箱上装有油位计，实时监测油温与油位。

  The cooler in the oil tank makes sure the temperature stays low.

  The oil level gauge can monitor the real-time oil temperature and the oil level.

   

5,油箱上装检修窗口，方便检修

The round maintenance window in the oil tank is installed, easy to maintain.

  

6,电机与油泵采用连轴器连接，便于拆卸和检修。

The electrical motor and oil pump are connected by the connecting shaft, which is easy to be disassembled and maintained.

7,油箱内部高低斜面，便于残油排出。

The base plate of the oil tank is a high-low slope, so it is easy to discharge the bottom oil.

 

制造砖产品（部分）：

我们的技术可广泛应用于电厂钢厂湿排灰、干排灰、混排灰、炉渣、自燃煤矸石、石粉、石硝（小石子）、沙子、陶粒、尾矿砂、火山灰（渣）、钢渣、电石渣、水淬渣、风淬渣、重矿渣、冶炼渣、水渣、旱渣、硫酸渣、磷肥渣、碱渣、铝厂红泥、电石泥、电解铜渣、工业废渣、废陶瓷渣、废砖粉、页岩、建筑垃圾等各种原料生产免烧砖，空心砖，多孔水泥砖，彩色地砖，路沿石等。

 

  北京总部地址：北京市朝阳区管庄东里甲一号科研生产区（国家建筑材料工业技术情报所大楼）

     单位全称：北京中材建科建材技术研究所

     北京设备制造基地地址：北京市通州区宋庄镇小堡工业区

     电话：010-65742915 65742916 65742917 65742918 

     传真：010-65742913 65798737

     销售400热线电话：400-6500-456 

      雷工：13121754035 

     国际部：010-65798737 65767712

     投诉电话：010-65763761

     中文官网：www.8108.cn  

     英文官网：www.zcjk.com     

      E-Mail：zcjk@vip.sina.com

     武汉分部：

     武汉分部地址：武汉市江汉区发展大道222号华南国际A座 武汉中材建科智能装备有限责任公司

     武汉设备制造基地地址：（武汉城市圈）孝感市孝南经济开发区长兴三路

电话：027-85413858  88734633      

 

      北京中材建科是专业生产建材设备的大型集团企业，在北京市通州区有100多亩的建材设备产业园，生产的产品有彩色路面砖设备，路沿石设备，空心砖设备，水泥彩瓦设备，免烧砖设备，搅拌站设备，保温板设备等建材设备。集团累计投资一亿人民币，在武汉城市圈孝感广场工业园建设占地100多亩，员工1000多人的产业园。在国内云南、贵州、广东、广西、四川、陕西、黑龙江、新疆、湖北、湖南等多省市设立服务办事处，设备远销利比亚、赞比亚、安哥拉、尼日利亚、委内瑞拉、巴西、阿根廷、印度、巴基斯坦、俄罗斯、哈萨克斯坦、缅甸、朝鲜、韩国、乌克兰、澳大利亚、苏丹、阿曼等80多个国家。     

      众多企业和个人就工业废渣、地方资源利用、建筑装饰等领域与本所广泛合作，均取得了良好的社会效益和经济效益。凭借专业技术优势和科研成果，我单位被中国环境保护产业协会和中国砌块协会吸收为会员单位。在建筑业蓬勃发展的今天，我所科研人员潜心研究，不断开发出适合我国国情的低投入高回报建材项目，是中小企业和个人投资办厂及粘土砖厂转型的理想选择。      

      致力于优质、环保、新型建材的研发是我们矢志不渝的追求。

      

    

北京中材建科全自动制砖机 空心砖机 路面透水砖机设备    

电话：010-65742915 65742916 65742917 65742918 

     传真：010-65742913 65798737

     销售400热线电话：400-6500-456 

      雷工：13121754035