深孔钻镗床切削油

     1.安*性好，对人和环境无不良影响。
     2.优良的防锈性、润滑性和极压性，加工精度高。
     3.本品含有高渗透性润滑剂，降低摩擦阻力及操作负荷。
     4.延长*模具的使用寿命，减少钻头磨损断裂。
     5.粘度合适且长时间保持不变，挥发性小，稳定性高。
     6.油品流动性好，排屑快，清洗性好。
     7.油品抗气雾性能优良，油料消耗较少，使用成本较低。
Products characteristics:
    ● good safety, no adverse effects on people and the environment.
    ● antirust, lubrication and extreme pressure, high precision machining.This product contains high permeability lubricant, reducing friction and the operating load.
    ● extend knife die life, reduce the gun drill wear fracture.
    ● suitable viscosity and long time constant, low volatility, high stability.
    ● oil has good fluidity, fast chip removal, cleaning and good.The excellent performance of anti fog oil, fuel consumption is less, the use of low cost。
产品用途：适用于不锈钢、铝合金、碳钢、铸铁等各种材质工件的深孔钻、深孔镗的切削加工。

注意事项：密封储存，防止日晒、雨淋或混入杂质，严禁与其他油品混用。
包装及储运：200升国标桶包装，净重170公斤/桶。
Note: sealed storage, to prevent the sun, rain or impurities, is strictly prohibited and other oil mixture.
Packing and storage: 200 liters GB drum, net weight 170 kg / barrel..