铁侠士-普达汽车暗锁

铁侠士-普达汽车防盗器 智能暗锁英文出口版可以根据客户要求定制功能及包装

Distinguished Customers:

Thank you for choosing our company’s auto intelligent and stealth anti-theft system. Before using this product, you should read the instructions carefully to grasp the predominant performance. This product adopts the most advanced none-contact ID transmission technology and adheres to the “People Oriented, Automatic and Safer” design theory, presenting that the host and recognizer applies for the signal processor and large-scale IC with the intelligent control function. Due to the advantages of the small volume, easy operation, concealment and strong anti-theft feature, our company stands out from a wide variety of auto anti-theft products. 
Working Principle
When the recognizer starts, a group of different signals (1.2 billion groups of passwords totally) will be sent automatically for each second and the identified distance is five meters. When the engine starts, the system will scan the password (The vehicle can be initiated at this moment.). If scanning the right password, the vehicle can continue to move, failing to scan in 20 seconds will lead to the close of engine.  
Notes
This product is suitable for the autos with the power supply of 12 V. 
Please initiate the recognizer at the first time to use (It is close when leaving the factory.): Press the function button on the side of recognizer and the indicator light flashes once. 
Carry the recognizer when driving and put it far from the car keys. 
After the car initiated and the system scanned successfully, the sound like “Bi” shows the legal driving. The car will be flamed out, if the signal is failure after scanning 20 seconds. 
Please close the recognizer if you want to store it for a long time. It can lengthen the service life of battery relatively: Press the function button on the side for 3 seconds and the indicator light flashes twice. 
If the recognizer is lost or damaged, please move the emergency switch to the position of “O” when you want to initiate the vehicle provisionally.
Replace the Recognizer Battery
The battery is CR 2450 button battery with high capacity, which can be used for more than two years under normal conditions. If the power is lower than the working voltage, the vehicle will be ringing for 10 seconds when initiated and the LED of recognizer will flash all the time. Change the same type of battery within one month. 
Match the Recognizer and the Host
If the recognizer is lost and needs to match again, please press the learning key of host and then press the function key of recognizer. With the sound of “Bi”, the match is successful. (Note that the current recognizer being used needs to be matched again.) Two recognizers can be matched with only one host, thus the lost recognizer will lose its functions.