厂商 :烟台史密得机械设备制造有限公司
山东 烟台- 主营产品:
- 汽车钣金整修设备
- 汽车钣金喷漆线
- 汽车烤漆房
v K6系列秉承欧洲的先进技术,充分研究了操作者的实际需要,即欧洲设备的优劣,充分考虑了中国钣金作业的各种实际情况,本着简单、实用、安全、精确的要求,是框架式校正仪的经典之作。
v 欧款框架式工作平台,采用冷拔高合金矩管焊拼,平面度高,强度大。举升架由电动液压泵控制,操作方便快捷。
v 垂直升降平台,可当剪式举升机使用,在252mm-1620mm范围内的多个高度安全定位。
v 平台底座可收起,四个底轮可灵活移动,车辆固定到平台后,可根据修理需求,将平台与车辆同时整体移动到指定位置,解决修理空间不足、不固定的情况。
v 专利设计的坡道,上车方便、快捷,亦可用于支撑车轮,更便于事故车维修中主夹具加紧车辆。
v 独立自由度的拉塔,移动方便灵活,固定牢固快捷,一次固定,多角度拉伸。进口液压系统,动力强劲,寿命长。
v 钣金工具,经过锻打、整体调制、高频蘸火热处理工艺,强度高、使用寿命长,几乎考虑了任意变形的校正。
v 专利设计的主夹具钳口,固定牢固,操作快捷,大大提高工作效率。伸缩式轴距坐标测量(PTP)世界最先进的测量方式,无间断点,操作方便。激光雕刻尺身刻度,持久耐用。
? European working frame machine, welded with cold high alloy rectangular tubes, full plate and high intensity. Controlled by electronic hydraulic pump, the lifting frame is operated conveniently and quickly.
? The vertical lifting frame can be used as a scissor lift, orientated safely at height from 252mm to 1620mm.
? Frame basement can be put up, four wheels can be movable. After fixing vehicle to frame, move them together to specified position, which can make up insufficient space and unfixing.
? Slops with patient for driving vehicle on quickly and conveniently are widely used for holding wheels, which helps clamp vehicle needed to repair.
? The flexible moving pulling tower can be fixed firmly and stretched at varied direction. Imported hydraulic system has strong power and long life.
? Forged, modulated and heated by frequency, the metal sheets has high intensity and long life, any deformation correction is considered.
? Main clamps are forged and heat-treated,high strength and long life,fix the auto quickly and accurately,also the extension height and angle can be adjustable.Scientific design, firm fixing and quick operation improve working efficiency greatly.
? Retractile wheelbase coordinates measuring (PTP), the most advanced measuring system, no interrupted point, operated conveniently, laser carved scale, durable.
主要技术参数 |
SPECIFICATION |
K6 |
工作台长度 |
Platform length |
4200mm |
工作台宽度 |
Platform width |
980mm |
工作台高度 |
Platform height |
252-1620mm |
拉塔最大推力 |
Post Max.tension |
95KN |
动力气源压力 |
Pneumatic pressure range |
0.8Mpa |
塔柱工作范围 |
Post working range |
360° |
液压系统最大工作压力 |
The maximum working pressure of hydraulic system |
70Mpa(10000Psi) |
最大承载 |
Max.lifting weight |
3200Kg |
设备总重 |
Gross weight |
1700Kg |
因适应市场要求,公司保留修改权利 |