电线料 TPE厂家、批发、价格、电话

厂商：东莞市顺隆塑胶原料有限公司

广东东莞

联系电话：13713179401

商品详细描述

美国TEKNOR Apex 电线电缆 Elexar EL-1164A TPE 电线料 TPE塑胶原料顺隆塑胶原料有限公司

TPE塑胶原料的特点：

特性备注：地下电缆、电缆护套、电器导线护套材料、电器导线绝缘材料、电线电缆应用、电线护套、工业电缆绝缘材料、连接器、软线护套、终端电缆护套材料

重要参数： 熔体流动速率:3 g/10min 密度:1.18 g/cm3 拉伸强度:15.2 MPa 断裂伸长率:550 % 硬度:56

美国TEKNOR Apex 电线电缆料

Medalist MD-115 TPE

General

Material Status

Availability

Uses

Appearance

Forms

Processing Method

Processing Information
Injection	Nominal Value	Unit
Rear Temperature	199 to 216	°C
Middle Temperature	213 to 221	°C
Front Temperature	221 to 227	°C
Nozzle Temperature	221 to 229	°C
Processing (Melt) Temp	221 to 229	°C
Mold Temperature	25.0 to 65.6	°C
Injection Pressure	1.38 to 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 to 0.345	MPa
Screw Speed	50 to 100	rpm
Cushion	3.81 to 25.4	mm
Injection Notes
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).
Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.	193 to 210	°C
Cylinder Zone 2 Temp.	199 to 216	°C
Cylinder Zone 3 Temp.	213 to 221	°C
Cylinder Zone 5 Temp.	221 to 227	°C
Die Temperature	221 to 229	°C
Extrusion Notes
Screw Speed: 30 to 100 rpm

标签：