仿真器MSP-FET

Description

 

 

 

The MSP-FET is a powerful flash emulation tool to quickly begin application development on MSP430 microcontrollers.

 

 

 

It includes a USB interface to program and debug the MSP430 in-system through the JTAG interface or the pin-saving Spy-Bi-Wire (2-wire JTAG) protocol. The enclosed MSP-FET development tool supports development with all MSP430 devices and is designed for use in conjunction with PCBs that contain MSP430 devices; for example, the MSP430 target socket boards.

 

 

 

Technical Specifications

 

 

 

Software configurable supply voltage between 1.8 V and 3.6 V at 100 mA

 

Supports JTAG Security Fuse blow to protect code

 

Supports all MSP430 boards with JTAG header

 

Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols

 

Features

 

 

 

USB debugging interface to connect any MSP430 MCU to a PC for real-time, in-system programming and debugging

 

Enables EnergyTrace? technology for energy measurement and debugging on all MSP430 devices in the Code Composer Studio and IAR Embedded Workbench development environments

 

Up to 4x faster read/write speeds than the previous FET programmer version, MSP-FET430UIF

 

Includes Backchannel UART for bi-directional communication between the MSP430 and a PC - This could enable simulation of inputs from sensors as well as logging of debug data while an application is running

 

 

 

What's Included

 

 

 

MSP-FET interface module

 

14-conductor cable

 

Micro USB CableDescription

 

The MSP-FET is a powerful flash emulation tool to quickly begin application development on MSP430 microcontrollers. 

 

It includes a USB interface to program and debug the MSP430 in-system through the JTAG interface or the pin-saving Spy-Bi-Wire (2-wire JTAG) protocol. The enclosed MSP-FET development tool supports development with all MSP430 devices and is designed for use in conjunction with PCBs that contain MSP430 devices; for example, the MSP430 target socket boards. 

 

Technical Specifications

 

Software configurable supply voltage between 1.8 V and 3.6 V at 100 mA

Supports JTAG Security Fuse blow to protect code

Supports all MSP430 boards with JTAG header

Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols

Features

 

USB debugging interface to connect any MSP430 MCU to a PC for real-time, in-system programming and debugging

Enables EnergyTrace? technology for energy measurement and debugging on all MSP430 devices in the Code Composer Studio and IAR Embedded Workbench development environments

Up to 4x faster read/write speeds than the previous FET programmer version, MSP-FET430UIF

Includes Backchannel UART for bi-directional communication between the MSP430 and a PC - This could enable simulation of inputs from sensors as well as logging of debug data while an application is running

 

What's Included

 

MSP-FET interface module

14-conductor cable

Micro USB Cable

Description

 

The MSP-FET is a powerful flash emulation tool to quickly begin application development on MSP430 microcontrollers. 

 

It includes a USB interface to program and debug the MSP430 in-system through the JTAG interface or the pin-saving Spy-Bi-Wire (2-wire JTAG) protocol. The enclosed MSP-FET development tool supports development with all MSP430 devices and is designed for use in conjunction with PCBs that contain MSP430 devices; for example, the MSP430 target socket boards. 

 

Technical Specifications

 

Software configurable supply voltage between 1.8 V and 3.6 V at 100 mA

Supports JTAG Security Fuse blow to protect code

Supports all MSP430 boards with JTAG header

Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols

Features

 

USB debugging interface to connect any MSP430 MCU to a PC for real-time, in-system programming and debugging

Enables EnergyTrace? technology for energy measurement and debugging on all MSP430 devices in the Code Composer Studio and IAR Embedded Workbench development environments

Up to 4x faster read/write speeds than the previous FET programmer version, MSP-FET430UIF

Includes Backchannel UART for bi-directional communication between the MSP430 and a PC - This could enable simulation of inputs from sensors as well as logging of debug data while an application is running

 

What's Included

 

MSP-FET interface module

14-conductor cable

Micro USB Cable

Description

 

The MSP-FET is a powerful flash emulation tool to quickly begin application development on MSP430 microcontrollers. 

 

It includes a USB interface to program and debug the MSP430 in-system through the JTAG interface or the pin-saving Spy-Bi-Wire (2-wire JTAG) protocol. The enclosed MSP-FET development tool supports development with all MSP430 devices and is designed for use in conjunction with PCBs that contain MSP430 devices; for example, the MSP430 target socket boards. 

 

Technical Specifications

 

Software configurable supply voltage between 1.8 V and 3.6 V at 100 mA

Supports JTAG Security Fuse blow to protect code

Supports all MSP430 boards with JTAG header

Supports both JTAG and Spy-Bi-Wire (2-wire JTAG) debug protocols

Features

 

USB debugging interface to connect any MSP430 MCU to a PC for real-time, in-system programming and debugging

Enables EnergyTrace? technology for energy measurement and debugging on all MSP430 devices in the Code Composer Studio and IAR Embedded Workbench development environments

Up to 4x faster read/write speeds than the previous FET programmer version, MSP-FET430UIF

Includes Backchannel UART for bi-directional communication between the MSP430 and a PC - This could enable simulation of inputs from sensors as well as logging of debug data while an application is running

 

What's Included

 

MSP-FET interface module

14-conductor cable

Micro USB Cable

 

       李进
深圳博瑞图电子科技有限公司
TEL     :0755-83244576
MOB    :13798234453
FAX     :0755-83244576

ADD    :深圳市福田区福明路雷圳大厦西半层503室（上海宾馆对面）
EMAIL :lijin810230@163.COM
网     址：www.szprotools.com