厂商 ：百仕得机电设备（苏州）有限公司
江苏 苏州- 主营产品：
- 高频逆变直流点焊机
- 金属点焊机
- 自动化电池点焊机
联系电话 ：18912627389
商品详细描述
百仕得此套产品可做美国小霸125DP的替代品。8年经验，成熟产品型。可搭配气动/脚踏式平衡焊焊接机头﹑精密焊接电源控制器分体设计，便于不同生产线上组合。 125焦耳，完全不受电网电压波动的影响，快速﹑精确焊接。双脉冲输出，焊镀层材料极佳。可远程控制，便于自动线上使用。数字能量设定数字化精确，使调试操作更简单易用。可存储多种焊接程序，方便多种焊接。
每一次焊接能量输保持一致，焊接时间短，时间短使工件的焊接痕迹和变形最小。放电脉冲非常短、热量集中，能有效减小工件的焊接压痕和变形。对电池本身内阻没有任何影响。
■ 采用16位微处理器控制，7种焊接程序存储
■ 快速充放电，120次/分钟（25％能量）
■ 提供高的峰值能量和快速的上升时间，三种波形选择
■ 每一次焊接能量输出保持一致
■ 解决大多数精密小零件的焊接
■ 工件的焊接痕迹和变形最小。
■ 高稳定性的输出，不受线电压（电网）波动的影响
■ 可远程控制，便于自动生产线上的应用
It uses 16-bit microprocessor control and has 7 welding program storages .
Fast discharge which is 120 times per minute (25% energy) .
It provides high peak energy and fast increase time with the selection of three wave forms.
The energy output of each welding can be constant .
It resolves the welding of most precision small parts .
The welding marking and deformation can be reduced to the minimum .
Highly stable output which is not affected by the voltage (electric grid) turbulence .
It can be remotely controlled and is easy for use on production lines .
百仕得扣式电池点焊机是采用恒流恒压控制的高频逆变式焊接电源。通过恒流，恒压控制使焊接的一致性得到极大地提高，飞溅减少到最小，独有的预热缓升功能使焊接工件温度从冷到热均匀上升，焊点更加牢固;根据高速反馈的瞬时响应，实现高速，高质量，高可靠的精密焊接。放电脉冲非常短、热量集中，能有效减小工件的焊接压痕和变形。对电池本身内阻没有任何影响。
百仕得扣式电池点焊机功能特点
■ 多种控制方式（恒流，恒压，恒功率）
■最大输出电流达5000A
■5KHz高速反馈控制焊接
■有效减少焊接飞溅
■焊接时间可调（0?99ms）
■多组输入，输出信号，便于多机头使用
Our products are manufactured with the high-frequency inversion welding power supply which is controlled by constant current regulation and constant voltage. They have greatly improved the consistence of welding and have reduced the splashing to the minimum. The unique preheating function has allowed the temperature of welding parts to increase evenly which has allowed the welding spots to be more secure. Because of the instant response of high-speed feedback, the precision welding of high speed, high quality and high reliability has been achieved.
每一次焊接能量输保持一致，焊接时间短，时间短使工件的焊接痕迹和变形最小。放电脉冲非常短、热量集中，能有效减小工件的焊接压痕和变形。对电池本身内阻没有任何影响。
■ 采用16位微处理器控制，7种焊接程序存储
■ 快速充放电，120次/分钟（25％能量）
■ 提供高的峰值能量和快速的上升时间，三种波形选择
■ 每一次焊接能量输出保持一致
■ 解决大多数精密小零件的焊接
■ 工件的焊接痕迹和变形最小。
■ 高稳定性的输出，不受线电压（电网）波动的影响
■ 可远程控制，便于自动生产线上的应用
It uses 16-bit microprocessor control and has 7 welding program storages .
Fast discharge which is 120 times per minute (25% energy) .
It provides high peak energy and fast increase time with the selection of three wave forms.
The energy output of each welding can be constant .
It resolves the welding of most precision small parts .
The welding marking and deformation can be reduced to the minimum .
Highly stable output which is not affected by the voltage (electric grid) turbulence .
It can be remotely controlled and is easy for use on production lines .
百仕得扣式电池点焊机是采用恒流恒压控制的高频逆变式焊接电源。通过恒流，恒压控制使焊接的一致性得到极大地提高，飞溅减少到最小，独有的预热缓升功能使焊接工件温度从冷到热均匀上升，焊点更加牢固;根据高速反馈的瞬时响应，实现高速，高质量，高可靠的精密焊接。放电脉冲非常短、热量集中，能有效减小工件的焊接压痕和变形。对电池本身内阻没有任何影响。
百仕得扣式电池点焊机功能特点
■ 多种控制方式（恒流，恒压，恒功率）
■最大输出电流达5000A
■5KHz高速反馈控制焊接
■有效减少焊接飞溅
■焊接时间可调（0?99ms）
■多组输入，输出信号，便于多机头使用
Our products are manufactured with the high-frequency inversion welding power supply which is controlled by constant current regulation and constant voltage. They have greatly improved the consistence of welding and have reduced the splashing to the minimum. The unique preheating function has allowed the temperature of welding parts to increase evenly which has allowed the welding spots to be more secure. Because of the instant response of high-speed feedback, the precision welding of high speed, high quality and high reliability has been achieved.
相关产品推荐
