厂商 ：南昌麦翔科技有限公司
江西 南昌市- 主营产品：
- 软管家
- 编码器
- 缓冲器
联系电话 ：18970079161
商品详细描述
Walther Praezision创建于1950年，自创建以来致力于生产快速接头，联轴器等紧固类产品，南昌麦翔科技发展有限公司长期代理德国Walther Praezision低压快速接头，中压快速接头，高压快速接头。
Series LP / SP
Nominal bore:
2.5, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm
Working pressure:
up to 10 MPa (single types up to 20 MPa) dependent on nominal bore and material; in part also suitable for vacuum
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
steel and brass with different surface coatings, stainless steel 1.4404 / 1.4571 or similar
Special features:
Squirt-free, many types of connections, locking aid, ring grips for larger nominal bores
Series KL
Nominal bore:
6, 12 and 30 mm
Working pressure:
up to 1.2 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
polyamide (PA), polyvinylidenfluoride (PVDF), polypropylene (PP), polyacetal resin (POM) or similar
Series UF
Nominal bore:
6, 7, 12, 19 and 32 mm
Working pressure:
up to 4 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases, etc.
Materials:
steel and brass with different surface coatings; stainless steel 1.4404 / 1.4571 or similar
Special Features::
Due to the different shape of the guiding parts (triangular, square, round) of coupling and adaptor only coupling halves with equivalent shapes can be connected.
Series BF
Nominal bore:
5, 9 and 12 mm
Working pressure:
up to 0.4 MPa (dependent on nominal bore and material)
Media:
water, steam, solvents, acids, bases, oils, all non-lubricating media, etc.
Materials:
stainless steel 1.4404/1.4571 or similar
Special features:
Clean break coupling with easily cleanable smooth ball-face outer contour;
can also be connected under high pressures, squirt-free, high flow rate, automatic lock
Series LS
Nominal bore: Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media: Materials:
compressed air coupling housing: steel durnicoated
locking sleeve: brass passivated
Special features :
Compressed air safety coupling with automatic lock and very high flow rates; a special design avoids the dangerous whip effect completely.
The safety coupling is "DEKRA type-tested".
Fits onto different nipple contours.
see also Series LS in large nominal sizes(12, 23 and 38 mm)
Series LS large nominal sizes
Nominal bore: Working pressure:
12, 23 and 38 mm up to1.6 MPa
Media:
compressed air
Materials:
coupling housing: brass nickel plated, locking sleeve: aluminium hardcoated
Special features:
compressed air safety coupling for high flow rates
(free pass when valve is opened)
Unlocking only possible with low residual pressure (this avoids the dangerous whip effect completely).
Series LT
Nominal bore : Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media:
compressed air
Materials:
coupling housing: aluminium hardcoated
locking sleeve: impact resistant plastics
Special features:
Compressed air coupling in very light design for use on the tool side, very high flow rate, fits onto different nipple
Series LP / SP
Nominal bore:
2.5, 3, 4, 6, 7, 9, 12, 19, 32 and 50 mm
Working pressure:
up to 10 MPa (single types up to 20 MPa) dependent on nominal bore and material; in part also suitable for vacuum
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
steel and brass with different surface coatings, stainless steel 1.4404 / 1.4571 or similar
Special features:
Squirt-free, many types of connections, locking aid, ring grips for larger nominal bores
Series KL
Nominal bore:
6, 12 and 30 mm
Working pressure:
up to 1.2 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases
Materials:
polyamide (PA), polyvinylidenfluoride (PVDF), polypropylene (PP), polyacetal resin (POM) or similar
Series UF
Nominal bore:
6, 7, 12, 19 and 32 mm
Working pressure:
up to 4 MPa (dependent on nominal bore and material)
Media:
water, compressed air, diverse fluids, fuel, lubricating greases / oils, technical gases, etc.
Materials:
steel and brass with different surface coatings; stainless steel 1.4404 / 1.4571 or similar
Special Features::
Due to the different shape of the guiding parts (triangular, square, round) of coupling and adaptor only coupling halves with equivalent shapes can be connected.
Series BF
Nominal bore:
5, 9 and 12 mm
Working pressure:
up to 0.4 MPa (dependent on nominal bore and material)
Media:
water, steam, solvents, acids, bases, oils, all non-lubricating media, etc.
Materials:
stainless steel 1.4404/1.4571 or similar
Special features:
Clean break coupling with easily cleanable smooth ball-face outer contour;
can also be connected under high pressures, squirt-free, high flow rate, automatic lock
Series LS
Nominal bore: Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media: Materials:
compressed air coupling housing: steel durnicoated
locking sleeve: brass passivated
Special features :
Compressed air safety coupling with automatic lock and very high flow rates; a special design avoids the dangerous whip effect completely.
The safety coupling is "DEKRA type-tested".
Fits onto different nipple contours.
see also Series LS in large nominal sizes(12, 23 and 38 mm)
Series LS large nominal sizes
Nominal bore: Working pressure:
12, 23 and 38 mm up to1.6 MPa
Media:
compressed air
Materials:
coupling housing: brass nickel plated, locking sleeve: aluminium hardcoated
Special features:
compressed air safety coupling for high flow rates
(free pass when valve is opened)
Unlocking only possible with low residual pressure (this avoids the dangerous whip effect completely).
Series LT
Nominal bore : Working pressure:
6, 9 and 11 mm up to1.2 MPa
Media:
compressed air
Materials:
coupling housing: aluminium hardcoated
locking sleeve: impact resistant plastics
Special features:
Compressed air coupling in very light design for use on the tool side, very high flow rate, fits onto different nipple
相关产品推荐
