辐射消毒ABS食品级HMG47MD

厂商 ：沙泊塑料有限公司（中山）

广东 中山
  • 主营产品：
  • TPU
  • PPS
  • POM
联系电话 ：13432026331
商品详细描述

供应辐射消毒ABS食品级HMG47MD

 
General purpose, injection molding ABS for medical applications. Biocompatible (ISO10993). FDA compliant. Gamma & EtO sterilizable.
 
TYPICAL PROPERTIES (1)
MECHANICAL Value Unit Standard
Tensile Stress, yld, Type I, 5 mm/min 440 kgf/cm? ASTM D 638
Tensile Stress, brk, Type I, 5 mm/min 340 kgf/cm? ASTM D 638
Tensile Strain, yld, Type I, 5 mm/min 2 % ASTM D 638
Tensile Strain, brk, Type I, 5 mm/min 24 % ASTM D 638
Tensile Modulus, 5 mm/min 23200 kgf/cm? ASTM D 638
Flexural Stress, yld, 1.3 mm/min, 50 mm span 730 kgf/cm? ASTM D 790
Flexural Modulus, 1.3 mm/min, 50 mm span 23900 kgf/cm? ASTM D 790
Tensile Stress, yield, 5 mm/min 50 MPa ISO 527
Tensile Stress, break, 5 mm/min 35 MPa ISO 527
Tensile Strain, yield, 5 mm/min 2.6 % ISO 527
Tensile Strain, break, 5 mm/min 24.8 % ISO 527
Tensile Modulus, 1 mm/min 2530 MPa ISO 527
Flexural Stress, yield, 2 mm/min 76 MPa ISO 178
Flexural Modulus, 2 mm/min 2410 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact, notched, 23°C 32 cm-kgf/cm ASTM D 256
Izod Impact, notched, -30°C 13 cm-kgf/cm ASTM D 256
Instrumented Impact Total Energy, 23°C 315 cm-kgf ASTM D 3763
Izod Impact, notched 80*10*4 +23°C 23 kJ/m? ISO 180/1A
Izod Impact, notched 80*10*4 -30°C 8 kJ/m? ISO 180/1A
THERMAL Value Unit Standard
Vicat Softening Temp, Rate B/50 98 °C ASTM D 1525
HDT, 0.45 MPa, 3.2 mm, unannealed 94 °C ASTM D 648
HDT, 1.82 MPa, 3.2mm, unannealed 80 °C ASTM D 648
CTE, -40°C to 40°C, flow 8.82E-05 1/°C ISO 11359-2
CTE, -40°C to 40°C, xflow 8.82E-05 1/°C ISO 11359-2
Vicat Softening Temp, Rate B/50 100 °C ISO 306
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm 80 °C ISO 75/Af
PHYSICAL Value Unit Standard
Specific Gravity 1.05 - ASTM D 792
Mold Shrinkage, flow, 3.2 mm (5) 0.5 - 0.8 % SABIC Method
Melt Flow Rate, 230°C/3.8 kgf 5.6 g/10 min ASTM D 1238
Density 1.05 g/cm? ISO 1183
Melt Flow Rate, 220°C/10.0 kg 19 g/10 min ISO 1133

Parameter
Injection Molding Value Unit
Drying Temperature 80 - 95 °C
Drying Time 2 - 4 hrs
Drying Time (Cumulative) 8 hrs
Maximum Moisture Content 0.1 %
Melt Temperature 220 - 260 °C
Nozzle Temperature 220 - 260 °C
Front - Zone 3 Temperature 215 - 240 °C
Middle - Zone 2 Temperature 205 - 225 °C
Rear - Zone 1 Temperature 190 - 210 °C
Mold Temperature 50 - 70 °C
Back Pressure 0.3 - 0.7 MPa
Screw Speed 30 - 60 rpm
Shot to Cylinder Size 50 - 70 %
Vent Depth 0.038 - 0.051 mm


标签：
相关产品推荐