Products

• GS Series EMAT Adaptor Systems
• PRP Piezoelectric pulser-receiver system
• Specialist Transducers
• PR Series Pulser-Receiver Systems
• Ultracouple Dry Couplant Material for Piezoelectric Transducers
• Texture Measurement of Sheet Metals
• EMAT Thickness Gauging and Flaw Detection
• Coating Thickness Measurement

GS Series EMAT Adaptor Systems

GS1100

The EMAT Adaptor GS1100 provides a means for current NDT users to benefit from the advantages of non-contact EMAT transducers for pulse-echo flaw detection and thickness guaging, without the large capital outlay of replacing existing piezoelectric based flaw inspection systems and thickness/corrosion monitors. It acts as a bridge between an EMAT probe and a detection system designed for piezoelectric transducers. Designed to work with modern NDT inspection systems, the Adaptor, when used with a suitable EMAT (provided as part of the package), has sufficient signal strength and resolving power to work on both oxide coated and oxide free ferritic steel surfaces, providing a major advantage for plant inspection over alternative systems. In certain circumstances measurement of austenitic stainless steel is also possible.

EMAT Adaptor GS1100 connected to a Karl-Deutsch Echograph 1090

EMAT Adaptor GS1100 working on an oxide free region of ferritic steel pipe

Specifications:

• Dimensions: 165 X 95 X 35mm approx. (box)
• Weight: 490g
• Power: 4X AA Batteries (Typically 40hrs battery life)
• Connections: 2X LEMO Coaxial to flaw detector,
  1X BNC to EMAT Probe
• Compatibility: Almost all standard flaw detectors – call for
  more information or a free trial with your flaw detector today.
• Prices : From ?1500;

Detailed specifications - GS Series EMAT Adaptor Systems
Disclaimer: Specifications are subject to change. Stated compatibilities are the results of testing by Sonemat alone, and unless otherwise stated are not endorsed by the manufacturers.
 
 

---

GS2020 EMAT Averaging Adaptor

The EMAT Adaptor GS2020 provides a means for NDT inspectors to benefit from the advantages of non-contact EMAT transducers for pulse-echo flaw detection and thickness gauging, without the large capital outlay of replacing existing piezoelectric based flaw inspection systems and thickness/corrosion monitors.
? Acts as a bridge between an EMAT probe and a flaw detector designed for piezoelectric transducers.
? Incorporates low power averaging electronics such that the signal-to-noise performance of the EMAT measurement is dramatically improved.
? Features automatic gain control (AGC), which increases reliability and inspection speed and can eliminate the need for operators to keep adjusting an EMAT stand-off ring or the gain setting on the flaw detector.
Designed to work with modern NDT inspection systems, the Adaptor?, when used with a suitable EMAT (provided as part of the package), has sufficient signal strength and resolving power to work on both oxide coated and oxide free ferritic steel surfaces, providing a major advantage for plant inspection over alternative systems. In certain circumstances measurement of austenitic stainless steel is also possible. The adaptor can also be used with piezoelectric transducers for some situations where the signal-to-noise ratio is too poor to allow measurement, but averaging is able to reveal the ultrasonic signals.