| 美国进口WATTS温度压力安全阀 |
美国机械工程师协会(ASME)认证*，加拿大工业标准协会(CSA)认证。自动关闭温度压力安全阀，适用于热水器，热值高达100,000 BTU/小时。
A.S.M.E rated*, CSA Listed. Self-closing T&P Relief Valves for Water Heaters up to 100,000 BTU/Hr.
2 合1温度压力安全阀，对于温度过高，压力过大的紧急状态提供成本最低，最有效的保护方案。
The combined 2 in 1 T&P relief valve provides the least expensive and proven means for protection against both excessive temperature and pressure emergency conditions.
对于热值达100,000 BTU/小时的热水容器和热水器提供全自动降温减压保护。系列10L配置测试杆和较短的温控杆，适用于直接安装在容器的螺纹孔上。系列100XL配置测试杆和加长温控杆，适用于安装在热水出水管路上，或直接安装在容器的螺纹孔上。温控杆必须浸在水中，并且与容器顶部的距离必须在152mm之内。进口为外螺纹，出口为内螺纹。降温设置为99oC。标准压力设置为75, 100, 125, 150 psi (5.27, 7.03, 8.79, 10.55 bar)。
Provides fully automatic temperature and pressure relief protection for hot water storage tanks and heaters up to 100,000 BTU/HR. Series 10L furnished with test lever and short thermostat for installation directly in tank tapping. Series 100XL furnished with test lever and extension thermostat for installation in the hot water outlet line or directly in the tank tapping. Temperature sensing element must be immersed in the water within the top 6" (152mm) of the tank. Male inlet and female outlet. Temperature relief 210oF (99oC). Standard settings 75, 100, 125, 150psi (5.27, 7.03, 8.79, 10.55 bar).
特点
Features
- 系列1L, 1XL, 10L和100XL - 通径DN20，(ASME认证*，CSA认证)，配置独特的涂敷特殊的热融胶的温控杆
Series 1L, 1XL, 10L and 100XL - Size 3/4" (20mm) (A.S.M.E. Rated*, CSA Listed) Feature a unique thermostat with special thermo-bonded coating
- 全青铜阀体
All bronze body
- 不锈钢弹簧
Stainless steel spring
- 温控杆准确且可靠。由美国瓦茨公司独立设计和制造。
Thermostat is accurate and proven. Exclusively designed and manufactured by Watts
|
| |
