阻燃棉

供应阻燃棉，防火棉，阻燃过滤棉，防火过滤棉，阻燃顶棉，防火过滤棉                         1.初效阻燃棉
该产品采用新一代纤维阻燃技术——无机高分子与有机高分子的复合与互穿，使阻燃剂无机高分子在纤维有机大分子中以纳米状态或以互穿网络状态存在，既保证了纤维强伸度，又实现了低毒、低烟、不熔融滴落和对环境不造成任何危害，火烧产生少量烟雾，不溶滴，收缩后碳化。
克重: 40g/m2～1000g/m
宽度: 0.5m～2m
厚度: 0.3cm～2cm
Flame retardant prefilter cotton
This product is made by the new technic of flame-retardant fiber, which is integrated by inorganic polymer and organic polymer in order to make flame retardant inorganic polymer exist in fiber organic polymer by the form of nanometer or mesh status. In that case, fiber strenghth can be ensured. Meanwhile, there is low gas, low mist, no melting drops and no harm to environment when flamed. It will be carbonized after shrinking.
Grammes per square metre: 40g/m2～1000g/ m2
Width: 0.5m～2m
Thickness: 0.3cm～2cm
2.中效阻燃棉
采用独创复合型阻燃纤维，使用先进生产工艺配合，具有永久性阻燃作用。火烧时，仅产生少量烟气，不熔滴，且具有自灭效果。
均匀度好，表面平整，有弹性，过滤效果好，容尘量大。稳定性好，便于裁剪、缝合，可车缝，可高周波、超声波焊接。可直接使用，可用于袋式过滤器制作。
克重: 40g/m2～1000g/m
宽度: 0.5m～2.2m
厚度: 0.3cm～5cm
Medium efficiency flame retardant filter cotton
It is made of unique synthetic flame retardant fiber and by advanced manufacture technics with permanent flame retardant function. There is little smoke and no melting drops with self-extinguishing effect when flaming.
Excellent uniformity, smooth surface, flexible, excellent filter efficiency, high dust holding capacity, good stability, easy to tailor, sew, available for machine sewing, high-frequency and ultrasound welding. It can be used in pocket filter making.
Grammes per square metre: 40g/m2～1000g/ m2
Width: 0.5m～2.2m
Thickness: 0.3cm～5cm                                                                                                                                      3.耐高温玻纤阻燃过滤棉
采用玻璃长纤维，以非织物式方式均匀迭合制成，出风面经过特殊处理，解决了普通耐高温玻纤棉的掉纤维现象。
性能稳定：可在240℃高温下长期使用而不老化，而且尺寸稳定性极佳，在250℃左右的热收缩率仅为0.1％，短时间暴露于300℃高中也不会收缩、脆化、软化或者融熔，只在500℃以上开始软化。
阻燃性能极佳（绝不燃烧），达A级阻燃国标，火烧不溶滴、不聚碳、不收缩、不变形。
抗化学性佳，耐湿性强，吸湿性低，使用寿命长
用途：广泛用于化工厂、火电厂、碳黑厂、水泥厂、石灰厂、炼焦厂、冶炼厂、沥青厂、喷漆厂以及电弧炉、油锅炉、焚化炉的高烟道和热空气过滤，既能有效除尘，又能抵抗有害烟雾的化学侵蚀。
规格：500×500×20（±3）mm
初阻力：≤65Pa
使用温度：≤250℃
High temperature resistant glass fiber filter mat
It is made of long fiberglass and non-woven with uniformity. Outlet side is specially treated in order to avoid the fiberglass shed.
Stable performance: No degradation under the high temperature of 240 degree Celsius use. Size is stable with only 0.1 % contraction at 250 degree Celsius. No contraction, no embrittlement, no softening, and no melting in short time at 300 degree Celsius, only softening at 500 degree Celsius.
Excellent flame retardance ( non-flame ), up to national Grade A flame retardance standard. No drop, no polycarbon, no contraction, and no deformation with firing.
Excellent chemical resistance, high moisture-resistance, low moisture absorption, long working life.
Application: Be widely used in chemical plants, thermal power plant, carbon plant, cement plant, lime factory, coking plant, metallurgical plant, asphalt plant, spray-paint plant, the flue and heated air channel filter of electric arc furnace, oil boiler, incinerator etc. Not only for dust extraction, but also for avoid chemical erosion and against poisonous gas.
Specification: 500×500×20（±3）mm
Initial pressure drop: ≤65Pa
Operating Temperature: ≤250 degree Celsius