BISON模块化夹紧系统

供应BISON模块化夹紧系统，快速夹持系统提高生产效率BISON公司的主要产品有，BISON车床卡盘，BISON大尺寸自定心卡盘，BISON单动卡盘，BISON三爪卡盘，BISON动力卡盘，BISON液压缸，BISON快换爪动力卡盘，与Kitagawa卡盘匹配的BISON卡盘部件，BISON夹头，BISON弹簧夹头，BISON夹紧单元，BISON夹紧元件，BISON卡盘卡爪，BISON模块化夹紧系统，BISON固定夹头等BISON夹具。

BISON卡盘公司大夹紧力四爪卡盘
新：四爪卡盘夹持力的增加
新：四爪卡盘夹持力的增加
我们广泛的产品范围包括四爪卡盘与钢体独立设计加工要求高的夹紧力使（如曲轴，汽轮机转子的加工，等）。
方形和圆形的部分可以夹在卡盘爪。由于力超过20丹每颚，大切削扭矩在相对较小的夹持直径可以得到。
卡盘可用于执行不同的操作，其详细的轧辊，大型曲轴，汽轮机转子，等钢体保证更长的寿命，更高的刚度和耐磨性，而四爪，允许精确的最大夹紧力矩形件的定心。
此外，额外的夹具的使用提供在卡盘体的T型槽。在机床主轴的安装是直接用短锥型的使用。
下巴的导游在钢体进行硬度50 HRC。主顶爪是由高质量的不锈钢。他们是硬化和回火硬度为56 HRC 60。这种性能保证很长寿命的卡盘。采用动力螺钉位于颌骨Jakob导轨得到很高的夹紧力。这些动力螺钉保证最高的性能在世界上拥有最好的技术参数。
卡盘的优化设计可以充分利用的电力螺丝的技术特点。因此，使用相对小的扭矩扳手，即为，有可能实现夹持力在每个爪超过20丹。
精密中心用完0.003mm允许精确定心的工件在夹紧它有一个大的夹持力，允许在巨大的权重高精度运算而被时间同时有效。
与大不平衡，例如曲轴零件加工，卡盘系统配重提供额外的稳定性和安全性。
问我们的专家，如果您有任何进一步的问题或希望实现的任何类似的设计！
  NEW: 4-jaw chuck with increased gripping force
NEW: 4-jaw chuck with increased gripping force
 Our wide product range comprises 4-jaw independent chucks made with steel bodies  designed for machining operations requiring high gripping forces (e.g. for the machining of crankshafts, turbine rotors, etc.).


Both square and round parts may be clamped with the chuck jaws. Due to the force of over 20.000 daN per jaw, large cutting torques at relatively small clamping diameters may be obtained.


The chucks can be used to perform different operations, in such detail as the rolls, large crankshafts, turbine rotors, etc. The steel body ensures a longer lifetime, greater stiffness and resistance to wear, while the four jaws allow for precise centering of rectangular pieces with maximum gripping forces.


Moreover the T-slots made in the chuck body provide for the use of additional clamps. Installation on the machine tool spindle is direct with the use of short taper type A.


The jaw guides made in the steel body are hardened to 50 HRC. The master and top jaws are made of stainless steel of high quality. They are case-hardened and tempered to a hardness of 56 to 60 HRC. That type of performance guarantees a very long lifetime of the chuck. Very high gripping forces are obtained by adopting JAKOB power screws positioned in the jaws guideways. These power screws assure the highest performance having the best technical parameters in the world.


Optimal design of the chuck allows to take full advantage of the technical features of the power screws. Therefore using relatively little torque on the wrench, i.e. 110Nm, it is possible to achieve a gripping force on each jaw of over 20.000 daN.


Precision centre with run-out of 0.003mm allows for exact centering of the  work piece before  clamping it with a large gripping force, allowing for high precision operations at enormous weights while being time-effective at the same time.


For working with parts with a large unbalance as for example crank shafts, the chuck has a system of counterweights to provide for additional stability and safety.


Ask our specialists if you have any further questions or wish to implement any similar design!

供应BISON模块化夹紧系统，快速夹持系统提高生产效率