| ASV-Stubbe流量计DFM 165～350系列测量范围为3～50,000L/h，量管材质为PVC-U、PA、PSU、PVDF，所有产品浮子材质为PVDF。口径可选DN10～DN65。可根据客户应用需求配置磁性浮子及4～20mA控制装置。 |
| |
For all industrial uses
• Practical graduated measuring ranges according to DIN, from 3 l/h to 50000 l/h
• DN 10 to DN 65 graduated tubes
• Tube lengths = type description 165 to 350 mm
• Materials for (almost) all media:uPVC, PA, PSU and PVDF
• Process automation using limit signal transmitters and measured value remote transmission
High measurement accuracy
and operational reliability
• Indicator accuracy according to VDI/VDE 3513
• Materials with reduced moisture absorption increase the measured value stability
• Pressure level PN 10, materials with high impact resistance and increased creep strength
• Hermetically sealed, connected with O-rings
• Require little maintenance,install radially
The medium, water, air liquid or gaseous chemicals, flows vertically from the bottom to the top.
The flow forces cause the float to lift without friction and its top graduation edge (largest diameter) indicates directly the flow volume on the graduated tube scale.
• The flowmeters DFM 165 to 350 have been further developed according to the increased demands in process engineering, and provide the following additional features:
• Optimized graduated tube geometry for increased accuracy
• Improved stabilization of the float to make reading easier
• Tube lengths to industrial standard
• Variety of options with up to 3 different tube lengths and DN per measuring range
• Material variants for practically every purpose
| | |
