拉动式计数器VS1真空断路器

Digital wheel: 5 digits, black bottom mispronounced character, word high 5MM
Shaft: right shaft
Return to zero:
Shaft diameter: 3MM
Speed: 360 times per minute
Service life: 100000 times
Direction: pull the handle from the top down pull carry, word wheel from the top down rotation carry;
The handle from bottom to carry on a pull, word wheel from the next down rotation carry
The use of temperature: -10 degrees ~60 degrees
Pull the angle: 40 degrees ~45 degrees
Weight: 30 grams of model description
JYL04-5-1 handle on the right, the handle from the top down pull carry, word wheel from the top down rotation carry
JYL04-5-2 handle on the right, the handle from bottom to carry on a pull, word wheel from the next down rotation carry
JYL04-5 type five bit counter for the number of cumulative record of pulling mechanical reciprocating motion. No reset mechanism. When the meter is full 99999 again from the beginning of 00000 to the next cycle. Counting wheel counter for internal gear transmission. On the right side of the pull handle when pulling the counter, propulsion mechanism which is connected with the handle of the counting wheel additive count. This counter is mainly used in the electrical products of high voltage switch, but also can be applied to test equipment, printing equipment.

数字轮：5位数，黑底白字，字高5MM
出轴：右出轴
回零：无
轴直径：3MM
速度：360次/分钟
使用寿命：10万次
拉动方向：手柄由上往下拉动进位，字轮由上往下转动进位；
                   手柄由下往上拉动进位，字轮由下往下转动进位
使用温度：-10℃~60℃
拉动角度：40°~45°