容积式油排

容积式油排系列：

分配器安装尺寸图

1安装螺丝M6，左右油管Φ6MM，出油口管Φ4MM（出油口可订装）

2建议使用润滑油（脂）黏度20-50CST

use M6 screw to set up , the left andright hole is 6MM(caliber )

The others are 4MM (caliber ) .can beorder .

The viscosity range of oil (grease ). can be order .

特点：

1每次流量固定供给润滑部位。

2不因打油时间长短，油品黏度而影响流量。

3系统加压时储油，卸压时注油，指示杆的连动可显示。

4流量大小可选配

5适合配有脱压装置之注油系统。

通用范围：生产于流量要求较严格的润滑部位。

Characteristic

1 every flux offers to lubricatingarea for certain

2 flux will not be influenced bypouring time and oil sensity .

3 when the system increase pressure,,it will reserve oil .

When the system remove pressure ,itwill pour oil ,both of the action will be showed by move ment ofindiccator .

4 the amount of flux can becooperated optionally.

5 itsuits oil pouring system withde-pressurized equipment .

Scope :

It used to lubricating area whichdemands strike flux