厂商 ：昆山鼎普乐机械设备有限公司
江苏 苏州- 主营产品：
- 高空车实心轮胎
- 钢圈设计
- 钢圈定制
联系电话 ：13024553929
商品详细描述
供应矿山支架搬运车用填充轮胎
支架搬运车是用于综采工作面液压支架整体
下井、整体搬家、倒面作业的专用设备。具有载重能
力大、运行速度快、机动灵活和爬坡能力大等优点，
可以实现不转载运输．特别适合于长距离运输．与
传统的绞车、平板矿车断续搬家方式相比，提高了
搬家速度。节省了辅助运输时间．并且使井下辅运
人员数量大大下降，工人的劳动强度降低，提高了
出煤效率，缩短了新旧工作面的接续时间，已经得
到国内大多数煤矿企业的普遍认可。
轮胎是各种车辆必不可少的载重部件之一。
根据轮胎工作原理的不同,有充气轮胎和实芯轮胎之分,后者主要用于工厂、 仓库、 码头等领域使用的叉车、电瓶车和起重车辆。
对于各种充气轮胎,虽然在承载允许范围之内具有非常好的舒适性、缓冲性和较高的行驶速度等,但在废弃物回收厂,码头,建筑工地…等特殊条件下,轮胎往往容 易被刺穿而导致漏气,造成误工及财产损失,因此 在一些采矿、 土木建筑等场所利用橡胶实芯轮胎来代替充气轮胎。普通橡胶实芯轮胎,虽然具有 较高的载荷性能,但缓冲性能差,行驶速度低,通常只能在15km/ h以下使用。
采用低硬度聚氨酯弹性体填充普通充气轮胎,由于填充材料硬度一般只有邵氏A10～20度,故这种轮胎不仅具有实芯轮胎的特点,而且缓冲性能好,载重量大,具有 类似于充气轮胎的减振性能,可用于较高速度行驶(速度高达80km/ h)。
聚氨酯填充（液态填充，泡沫填充）可以让你的工作车辆行驶在满是铁钉、碎玻璃、尖锐金属片、碎石的环境下，不用担心轮胎会爆胎泄气而停止工作，为您提供一个最安全、方便的解决方案。
Are You Still Interested?
Foam Fill is relatively new, harder to do and there are fewer places doing it. Although "Tire Fill" is called Foam Fill, they are not the same thing.
Foam Fill is a mixture of two liquids that produce heat and Carbon Dioxide when mixed. The machinery is more complicated than Tire Fill and the chances of botching a fill is greater with Foam Fill. The upside, is the Foam Fill has a much better ride but it has weight limitations
Manufacturers of the Foam Fill say the fill will allow users to achieve the load rating of the tire but not to exceed it. You need to use Tire Fill if you have to carry more than the tire was intended to do.
For example, you have a helicopter dolly. The writing on the tire says "Rated 500lbs" but the helicopter weighs 10,000 lbs. You need Tire Fill, not Foam Fill. If you have a wheelbarrow that will never carry more than 400lbs, then you need Foam Fill but not Tire Fill.
There are Foam Fill places here in Florida, Georgia, California, Nevada and few others. We will fill tires here at our facility but they must be under 24 inches tall and be only mower or landscape tires.
支架搬运车是用于综采工作面液压支架整体
下井、整体搬家、倒面作业的专用设备。具有载重能
力大、运行速度快、机动灵活和爬坡能力大等优点，
可以实现不转载运输．特别适合于长距离运输．与
传统的绞车、平板矿车断续搬家方式相比，提高了
搬家速度。节省了辅助运输时间．并且使井下辅运
人员数量大大下降，工人的劳动强度降低，提高了
出煤效率，缩短了新旧工作面的接续时间，已经得
到国内大多数煤矿企业的普遍认可。
轮胎是各种车辆必不可少的载重部件之一。
根据轮胎工作原理的不同,有充气轮胎和实芯轮胎之分,后者主要用于工厂、 仓库、 码头等领域使用的叉车、电瓶车和起重车辆。
对于各种充气轮胎,虽然在承载允许范围之内具有非常好的舒适性、缓冲性和较高的行驶速度等,但在废弃物回收厂,码头,建筑工地…等特殊条件下,轮胎往往容 易被刺穿而导致漏气,造成误工及财产损失,因此 在一些采矿、 土木建筑等场所利用橡胶实芯轮胎来代替充气轮胎。普通橡胶实芯轮胎,虽然具有 较高的载荷性能,但缓冲性能差,行驶速度低,通常只能在15km/ h以下使用。
采用低硬度聚氨酯弹性体填充普通充气轮胎,由于填充材料硬度一般只有邵氏A10～20度,故这种轮胎不仅具有实芯轮胎的特点,而且缓冲性能好,载重量大,具有 类似于充气轮胎的减振性能,可用于较高速度行驶(速度高达80km/ h)。
聚氨酯填充（液态填充，泡沫填充）可以让你的工作车辆行驶在满是铁钉、碎玻璃、尖锐金属片、碎石的环境下，不用担心轮胎会爆胎泄气而停止工作，为您提供一个最安全、方便的解决方案。
Are You Still Interested?
Foam Fill is relatively new, harder to do and there are fewer places doing it. Although "Tire Fill" is called Foam Fill, they are not the same thing.
Foam Fill is a mixture of two liquids that produce heat and Carbon Dioxide when mixed. The machinery is more complicated than Tire Fill and the chances of botching a fill is greater with Foam Fill. The upside, is the Foam Fill has a much better ride but it has weight limitations
Manufacturers of the Foam Fill say the fill will allow users to achieve the load rating of the tire but not to exceed it. You need to use Tire Fill if you have to carry more than the tire was intended to do.
For example, you have a helicopter dolly. The writing on the tire says "Rated 500lbs" but the helicopter weighs 10,000 lbs. You need Tire Fill, not Foam Fill. If you have a wheelbarrow that will never carry more than 400lbs, then you need Foam Fill but not Tire Fill.
There are Foam Fill places here in Florida, Georgia, California, Nevada and few others. We will fill tires here at our facility but they must be under 24 inches tall and be only mower or landscape tires.
相关产品推荐
