ELNEC烧录座代理厂家

东莞嘉多利精密电子有限公司是一家集研发，ELNEC烧录座代理厂商，生产，销售为一体的高科技企业，一直秉承技术创新，卓越服务的理念，ELNEC烧录座代理厂家，为电子产品开发和量产所需的开发设备、芯片烧录设备、IC芯片代烧录提供解决方案和服务。

Adapter manualInsert adapter to the device programmer ZIF socket according to the picture placed near of it. If you have some doubts about orientation of this adapter in device programmer ZIF socket， it is valid general rule， the orientation of the text of title is the same as the text on the top of the device programmer.Push the top of adapter ZIF socket to open it. Insert the device into the adapter ZIF socket. The right position of the programmed device in adapter ZIF socket is show at picture near (mainly left above) the adapter ZIF socket. Then release adapter ZIF socket.Visually check interconnection between device and adapter ZIF socket. If everything looks OK， the device is ready for programming.Be careful，ELNEC烧录座代理厂， because the incorrect insertion of adapter to the device programmer ZIF socket or device to the adapter ZIF socket can damage the programmed device.To take out the device push the top of adapter ZIF socket and remove device from it.When you finish work with adapter， remove it from the device programmer ZIF socket.Do not directly touch the pins of the adapter and adapter ZIF socket， because dirt may cause errors during programming of device.For handling with the device we recommended to use a vacuum pick up tool.Operation conditions: operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)， operating humidity 20%..80%， non condensing.

 

 

DIL48/SOP60 MMFO-01  (Ord. no. 70-2273)

 

特殊适配器，深圳烧录座，分配为3D+Flash或模块3dfo2g08vs4215封装在SOP60包中ZIF插座的操作

推动的适配器ZIF插座以打开它。将设备插入适配器ZIF插座。正确的编程设备适配器ZIF插座的位置附近的图片展示(主要是上图左)适配器ZIF插座。在这张图片参考(如针的位置1)指示装置的点，锥形的角落或它们的任何组合。然后释放适配器ZIF插座。视觉检查设备之间的互连和适配器ZIF插座。要小心，因为不正确的插入适配器设备程序员ZIF插座或设备适配器ZIF插座会损害编程设备。取出装置推动的适配器ZIF插座和删除设备。不直接接触适配器，适配器的别针ZIF插座，因为污垢在编程的设备可能会导致错误。操作条件:操作温度5°C÷40°C(41°F÷104°F)营业湿度20% . .80%，无冷凝

 

 

ELNEC烧录座代理厂、嘉多利，烧录座批发、深圳烧录座由东莞市嘉多利精密电子有限公司提供。ELNEC烧录座代理厂、嘉多利，烧录座批发、深圳烧录座是东莞市嘉多利精密电子有限公司（www.dgtclp.com）今年全新升级推出的，以上图片仅供参考，请您拨打本页面或图片上的联系电话，索取新的信息，联系人：张先生。