烧录器

量产烧录器BeeHive208S

BeeHive208S量产烧录器优质供应商BeeHive208S量产烧录器价格

编程器Beehive208S，Beehive204，一写多IC烧录器，万用量产_编程器_

    

 

BeeHive208S programmer is practically identical with the BeeHive8S programmer， difference is 'only' much higher programming speed (up to 10x) of high-capacity memories.The BeeHive208S is an extremely fast universal 8x 48-pin-drive Stand-Alone concurrent multiprogramming system designed for high volume production programming with minimal operator effort. The chips are programmed at near theoretical maximum programming speed.The BeeHive208S consists of 8 independent isolated universal programming modules， based on the BeeProg2 programmer 硬件. Therefore the sockets can run asynchronously (concurrent programming mode). Each programming module starts programming at the moment the chip is detected as inserted in the socket properly - independent of the status of the other programming modules. As a result， seven programming modules can be working while replacing the programmed chip on the eighth.Graphics control unit with touch screen provides basic control and easy monitoring of the programming flow.Modular construction of the硬件 - the programming modules work independently - allowing for continued operation if a part of the circuit becomes inoperable. It also makes service quick and easy.Hands-free operation: asynchronous and concurrent operation allows a chip to begin programming immediately upon insertion. The operator merely removes the finished chip and inserts a new chip. Operator training is therefore minimized.Supports all types of the silicon technologies found in the programmable devices of today and tomorrow without family-specific modules. You can be sure that new device support will require only a software update and (if necessary) a simple package convertor (programming adapter)， therefore minimizing ownership costs.Using built-in in-circuit serial programming (ISP) connector， the programmer is able to program ISP capable chips in circuit.Combines very competitive pricing with excellent 硬件 design for reliable programming. Probably the best 'value for the money'programmer in its class.Very fast programming due to high-speed FPGA driven 硬件 and execution of time-critical routines inside the programmer. As a result，全自动烧录器， when used in manually-operated production， this one-socket-programmer in most cases waits for an operator.Banana jack for ESD wrist strap connection to easily implement ESD protection control.

 

 

欧洲Elnec烧录器   ELNEC系列烧录器  BeeHive304 万用型烧录器

超高速通用64-pin驱动烧录器侧重于大容量IC

 

BeeHive304

超高速通用4x 64 - pindrive提供各种信号

设计的重点是高容量记忆编程。

简短描述:

一个单元的四个du立的通用编程站点(基于BeeProg3编程核心)

完全适合高要求的桌面编程，以及自动化的编程系统

基于FPGA设计的状态，强大的ARM处理器和内部SSD，BeeHive304准备在理论上可能的速度对设备进行编程

4x 64 - pin的丰富功能，烧录器，强大的pindriver为可编程设备的每一项技术提供编程信号

它支持VCC电压低至0.8V的设备

超快编程速度，可持续的编程速度大于22.5兆字节每秒

如果支持的内存足够快的话，2 GB的eMMC NAND闪存可以在100秒内完成

它使用了通用编程模块

编程模块接口的每个插脚上的ESD保护(pindriver和支持信号)

双连接到PC:USB(2.0高速)和LAN(最多1格)

易于使用的控制程序，适用于Windows XP到Windows 8.1(32位和64位)Windows XP的所有版本的MS。

一台BeeHive304烧录器可以连接到一台控制PC上，以更好地利用编程工作场所

使用简单的远程控制实现对第三方自动编程人员和机器的实现

搭在到自动机台可以实现64个烧录位的量产。

 

 

 

嘉多利(图)、半自动烧录器、烧录器由东莞市嘉多利精密电子有限公司提供。东莞市嘉多利精密电子有限公司（www.dgtclp.com）是一家专业从事“屏蔽箱,烧录器,烧录机,滤波器,IC烧录,无线测试仪器”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“嘉多利IC烧录”品牌拥有良好口碑。我们坚持“服务至上，用户至上”的原则，使嘉多利在工业自动控制系统及装备中赢得了众的客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！